Ask Experts Questions for FREE Help !
Ask
    sandra2007's Avatar
    sandra2007 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2007, 11:06 AM
    Murray Riding Mower
    How can I safely raise mower up to change blades?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 5, 2007, 11:25 AM
    To raise you use floor jack and jack stands. It is just about as easy and far more safe to remove deck to change blades. Good Luck
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Jul 6, 2007, 06:42 AM
    You May Also Use "car Ramps" To Pull The Mower Up Onto. Be Sure To Lock The Brake, And Chock The Wheels Though. But Esquire Is Right , You Can Be Safer By Just Removing The Deck And Flipping It Over, However, This Means You Will Have To Remove The Belt As Well From Either The Deck Pulleys Or The Pto Shaft Pulley.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray Riding Mower [ 3 Answers ]

My 1988 Murray mower worked fine last week... but I jumped on it this week and couldn't get it to turn over. Replaced the battery, but that didn't seem to help. Tonight I replaced the solenoid tonight, but that didn't seem to help. I'm getting nothing when I try to turn it over. Any advice? This...

Old Murray riding mower [ 8 Answers ]

I bought an old Murray riding mower last year. I'm not sure what year it is, but here is my problem: One of the rear tires has a flat, instead of loading up the whole mower in the back of the truck, I wouldm like to remove the wheel. I removed the holding pin and the washer from the outside of the...

Murray riding mower [ 3 Answers ]

I have a murray riding mower that I have replaced the solinoid and the starting switch but I still get no power to the starter. I can hot wire the starter and it will crank so there must be a problem somewher in the wires??

Murray Riding Mower [ 1 Answers ]

I have a 15x38" Murray. My drive belt keeps coming off. I got a new 73" belt from Outdoor Lawn Equipment. I can't get the belt on the back large pulley. The pulley is blocked by other parts. Can anyone help?

Murray Riding Mower [ 1 Answers ]

I bought a used Murray riding mower with a 40" deck. I want to add a mulching kit but can't seem to find one. Does anyone know if there are any interchangeable parts that will fit this mower?

View more questions Search