Ask Experts Questions for FREE Help !
Ask
    Redmaple86's Avatar
    Redmaple86 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 8, 2007, 07:34 PM
    Hampton Bay Tripoli ceiling fan
    Hi I have a Hampton Bay Tripoli ceiling fan and light it has a remote control the remote control does not work on low, only high and medium. The owners manual says model 739 237 or 739 200, The manual says it has a lifetime warranty, the contractor put it in the house when it was built 3 years ago. Is there any way to get it covered under the warranty when a contractor put it in the house. What would be the cost of fixing it.
    Redmaple86's Avatar
    Redmaple86 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jul 8, 2007, 07:35 PM
    [QUOTE=Redmaple86]Hi I have a Hampton Bay Tripoli ceiling fan and light it has a remote control the remote control does not work on low, only high and medium. The owners manual says model 739 237 or 739 200, The manual says it has a lifetime warranty, the contractor put it in the house when it was built 3 years ago. Is there any way to get it covered under the warranty when a contractor put it in the house. What would be the cost of fixing it, if it is not covered by the warranty
    Redmaple86's Avatar
    Redmaple86 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jul 8, 2007, 07:37 PM
    [QUOTE=Redmaple86][QUOTE=Redmaple86]Hi I have a Hampton Bay Tripoli ceiling fan and light it has a remote control the remote control does not work on low, only high and medium. The owners manual says model 739 237 or 739 200, The manual says it has a lifetime warranty, the contractor put it in the house when it was built 3 years ago. Is there any way to get it covered under the warranty when a contractor put it in the house. What would be the cost of fixing it, if it is not covered by the warranty. Let us know if it is worth fixing.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jul 10, 2007, 08:34 PM
    What happens when you switch it to low? Does the remote LED light? Probably needs a new receiver.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

View more questions Search