Ask Experts Questions for FREE Help !
Ask
    spyyder's Avatar
    spyyder Posts: 35, Reputation: -2
    Junior Member
    		  
    #1

    Jun 22, 2005, 03:05 PM
    Bending wood
    Can you actually bend wood? Up to what angle?. and how is it done (for woods like honeyburl, cherry, mahogany, etc - quality woods)?

    Thanks.

Check out some similar questions!

Wood Basements [ 1 Answers ]

How do I stop the noise from my well pump where the plastic pipe enters through the wall ? It a vibrating noise

Wood add-on furnace [ 5 Answers ]

I have recently installed a wood add-on furnace to my oil furnace. The way it works is a trunk line comes from oil furnace plenum(heat) to bottom of wood add-on, then all duct work for house is connected to plenum on wood add-on. The problem I'm having is getting the wiring for wood add-on...

Wood heat [ 2 Answers ]

Wood stove in basement,would like to use blower on existing forced hot air system to move heat in basement to first floor.

Twisted Wood [ 4 Answers ]

I have a piece of wood approximately 3x10 35" long. It is slightly twisted. I need a finished piece 2x6 32" long. How do I take off the high parts and leave the low? Running it through the planer doesn't get it, it just twists as it goes through. Please Helppppp! Thanks

Wood furnace [ 2 Answers ]

We have a wood furnace that blows heat to gas furnace. When fan/limit switches reaches temp blower kicks on blowing heat in.Worked fine last winter now blower will not kick in when limit is reached.Any idea why?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.