Ask Experts Questions for FREE Help !
Ask
    tknill's Avatar
    tknill Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 13, 2006, 10:09 PM
    Wood Basements
    How do I stop the noise from my well pump where the plastic pipe enters through the wall ? It a vibrating noise
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Sep 14, 2006, 11:13 AM
    Quote Originally Posted by tknill
    How do I stop the noise from my well pump where the plastic pipe enters through the wall ? It a vibrating noise
    Use pipe straps both before and after the pipe enters your house or you can simply shim the pipe where it comes through the wall into your house.
    Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wood add-on furnace [ 5 Answers ]

I have recently installed a wood add-on furnace to my oil furnace. The way it works is a trunk line comes from oil furnace plenum(heat) to bottom of wood add-on, then all duct work for house is connected to plenum on wood add-on. The problem I'm having is getting the wiring for wood add-on...

Wood heat [ 2 Answers ]

Wood stove in basement,would like to use blower on existing forced hot air system to move heat in basement to first floor.

Twisted Wood [ 4 Answers ]

I have a piece of wood approximately 3x10 35" long. It is slightly twisted. I need a finished piece 2x6 32" long. How do I take off the high parts and leave the low? Running it through the planer doesn't get it, it just twists as it goes through. Please Helppppp! Thanks

Wood furnace [ 2 Answers ]

We have a wood furnace that blows heat to gas furnace. When fan/limit switches reaches temp blower kicks on blowing heat in.Worked fine last winter now blower will not kick in when limit is reached.Any idea why?

Basements/ejector pumps/washers [ 11 Answers ]

A twist on a familiar question posted here... I am attempting to move my washer/dryer into my basement. It is rough plumbed for a bath, with a 4 inch waste line dumping into a sewage ejector pit. Can I cut a tee into that 4 inch waste line and route my 2 inch washer drain line into it? I am...

View more questions Search