Ask Experts Questions for FREE Help !
Ask
    emivicroll's Avatar
    emivicroll Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 22, 2007, 07:12 PM
    Program rth230b thermostat
    Program rth230b thermostat
    emivicroll's Avatar
    emivicroll Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jun 22, 2007, 07:12 PM
    Program rth230b thermostat
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #3

    Jun 22, 2007, 07:56 PM
    What is it you want to know? There is a sticky at the top of the electrical and lighting formun which might help you. Read it first then post back with questions. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Program honeywell RTH230B cooling system [ 1 Answers ]

I am having problems trying to program my cooling system to come on now. I tried with the programming of time, but that did not start the unit to come on. Thanks

Honeywell RTH230B Thermostat not following program [ 1 Answers ]

I have a Honeywell, #RTH230B programmable thermostat, but it is not following its program. Manually, it works fine. I have changed batteries. Is there some way to totally reset it, to fix it?

Honeywell Thermostat RTH230B [ 4 Answers ]

I see there are a few questions on this one, but mine seems simple. I have Red, Yellow, Green and White leads from the old Thermostat. I have no idea where to place the leads, in the channels under the screws or the channels on top. My leads do not reach from out of the wall to go under, and if it...

Honeywell Thermostat RTH230B [ 14 Answers ]

I have 6 wires to connect. The colors are as follows: W, Y, G, B, O, and R. The thermostat calls for W, G, Y, Rc, and Rh. Where do I plug in the R and what do I do with the B and O? Any help would be greatly appreciated. Thank you

View more questions Search