 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Shower Pump position problem?
I am not sure on one thing, is it possible to install a 2 bar shower pump in the loft that is above the shower head? As the cold water is fed from Cold Water Loft Tank in the loft so the cold water will be above the pump by 30cm or so and the hot water is coming from storage tank below it say 1m or 2m below the pump...
Or there's other option... connecting cold water to the mains and the hot water will be coming from Hot Water Cylinder... buying a shower pump only for hot water only but the pump will be above the hot water cylinder and shower head as it will be in the loft... Will I get stable water pressure at the shower head? Which is the best option? |
||||
|
||||
 Originally Posted by Jase17uk
I'm going to go with door #1. Let me take you to a site that will explain why in detail; http://www.bathroomexpress.co.uk/sho...rk_connections This site will not only give you specifications but also piping and installation instructions. Good luck, Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
OR, by email: Mailto:[email protected] This is the message: Hi Tom: My internet service was turned off a couple days before I left Grenada. As a Result I had not seen your latest comments on the pump as it presently exists.
I have a Trane XE 1000 heat pump manuf. In 2002. Yesterday, the A/C started having a problem, I checked the units inside and out and found the compressor fan not operating. The outside unit was hot and louder than usual. I turned it off overnight and this morning turned it on to find the fan...
Dcobb New member join date: jun 2006 Posts: 0 Wellsaver tank -------------------------------------------------------------------------------- Hi speedball1 i have a question for you. I have a well saver 56 gallon pump tank and i'm having some trouble. It's hooked to a one horse...
Hi, I bought a house with a well. And the well does not seem to function. Is there a way to diagonose the pump problem? I can see the voltage is applied to the pump. The pressure trigger is at the "on" position since the metal leads touch the base and I measured the voltage on the wires...
I am not sure on one thing, is it possible to install a 2 bar shower pump in the loft that is above the shower head? As the cold water is fed from septic tank in the loft so the cold water will be above the pump by 30cm or so and the hot water is coming from storage tank below it say 1m or 2m below...
View more questions Search
|
