Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Howling Composite Deck
[ 2 Answers ]
I have a customer who built a deck on the back of his house. The deck is about 8 feet off the ground. The house sits up on a hill and gets a fair amount of wind. The problem is that when the wind hits the side of the house it is forced up underneath the deck and blows upward. The result is what I...
Composite decking - Trek vs. Procell; Fair price for deck piles
[ 1 Answers ]
Hi there Any opinions on whether to use Trek or Procell for large composite deck at the beach? Any thoughts on a fair price for 20' deck pile vibrated 10' into sandy ground at Jersey Shore? Any input appreciated MCC
Composite Decking saw blade
[ 12 Answers ]
The manufacturer (Evergrain) recommends 2 teeth per inch. Would that mean an 80 tooth 12" chop saw blade and 40 tooth 7.25" circular saw blade? From ThisOldHouse.com - "To cut composite or plastic decking, manufacturers recommend using carbide-tipped saw blades with 18 to 24 teeth per inch, to...
Decking on a Slope
[ 3 Answers ]
We have a pool in our back yard with a ten foot concrete decking sourrounding it. We would like to extend a wood or simulated wood decking an additional 20 feet over an area that slopes down the side of a hill. The slope drops approx. 1:1 and I'm trying to figure out what type of footing I need...
Composite Decking
[ 1 Answers ]
I have an existing wood deck. Would like to replace the floor boards, railing and stair system with a composite material. Live by the ocean so need a product that will withstand the elements. Heard of Trex, Veranda, Fiberglass--any advice on these or other products would be appreciated. View more questions Search
|