Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ice maker is not calling for water. Water will dispense if V and T are jumpered.
[ 2 Answers ]
I've replaced the icemaker on a Kenmore. The water will not dispense. However, I used a wire jumper from V and T on the front of ice marker and water did dispense, freeze, and dump. However, the water will not automatically dispense. So, I know the value is good, but it's not getting the signal...
M1 SA8868 Ice Maker does not fill with water
[ 4 Answers ]
I have an M1 SR8868 Ice Maker in the fridge in my Motor Home. It cycles fine but no water comes in. I have checked and there is water flowing in the tubes. They are not frozen. Any ideas?
What does the ice maker water inlet valve have to do with the ice maker leaking?
[ 0 Answers ]
On my amana refrigerator, the ice maker leaks water at the inlet to the ice maker itself which drips heavily back into the dump tray which freezes the ice cubes all together. I was told the water inlet valve may be at fault. Why? Does the inlet valve have anything to do with the pressure going into...
Ice maker water fill erratic
[ 1 Answers ]
I have a Kenmore side by side refrigerator model 363.9532710 that has an ice maker model WR30X0290. After the initial water fill, the solenoid cycles again and again for a few seconds each time overfilling the ice tray. I have replaced the water supply solenoid but still have the same problem.... View more questions Search
|