Ask Experts Questions for FREE Help !
Ask
    mrmartin22's Avatar
    mrmartin22 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2010, 10:09 AM
    M1 SA8868 Ice Maker does not fill with water
    I have an M1 SR8868 Ice Maker in the fridge in my Motor Home. It cycles fine but no water comes in. I have checked and there is water flowing in the tubes. They are not frozen. Any ideas?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 1, 2010, 10:28 AM

    Could be a bad fill solenoid that opens/closes to let water into the freezer. First check your freeezer temp, what is it?
    mrmartin22's Avatar
    mrmartin22 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Jun 1, 2010, 10:35 AM

    I don't know the temp but it keeps popcycles and ice cream frozen, etc.
    mrmartin22's Avatar
    mrmartin22 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Jun 1, 2010, 10:36 AM

    Where is the solenoid?
    mrmartin22's Avatar
    mrmartin22 Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Jun 1, 2010, 01:49 PM

    I found the problem. The tubing from the ice maker to the solenoid has fallen apart.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ice maker not making cubes my ge profile ice cube maker has stopped making ice [ 1 Answers ]

Ice maker not making cubes my ge profile ice cube maker has stopped making ice

What does the ice maker water inlet valve have to do with the ice maker leaking? [ 0 Answers ]

On my amana refrigerator, the ice maker leaks water at the inlet to the ice maker itself which drips heavily back into the dump tray which freezes the ice cubes all together. I was told the water inlet valve may be at fault. Why? Does the inlet valve have anything to do with the pressure going into...

Hooking up water line to refrigerator for ice maker and water dispenser [ 2 Answers ]

Here is my problem, I just bought a refrigerator that has an ice maker and water dispenser which by the way is a Haier PRCS25. I then purchased an ice maker kit from the hardware which came with a self piercing saddle valve. From here I connected the valve to a 3/4" copper cold line pipe...

Ice maker water fill erratic [ 1 Answers ]

I have a Kenmore side by side refrigerator model 363.9532710 that has an ice maker model WR30X0290. After the initial water fill, the solenoid cycles again and again for a few seconds each time overfilling the ice tray. I have replaced the water supply solenoid but still have the same problem....

Kitchenaid ice maker won't make ice no water coming in [ 10 Answers ]

I have replaced the water valve and the module. Water dispensary works. The plastic lines are not plugged. The wire arm goes up and down. I poured water in the ice maker and in a few days there were ice in the pan. The model is #ksrf22dtal00. I crossed the connectors on the valve and the water...

View more questions Search