Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New Vessel Sink without overflow drains slow
[ 59 Answers ]
I installed a new vessel sink without an overfolw and it drains very slow. When I loosen a connection and let some air in it drains fine, just like it did with the original undercounter sink. So I assume I need to do something to compensate for the lack of an overflow. Any suggestions? Thanks.
What drain should I use for a vessel sink
[ 5 Answers ]
I've been told you need to use a special drain for vessel sinks to get them to drain. What are some of the recommended brands that work well in this application? Doug
Drain for Vessel Sink
[ 1 Answers ]
I just received my vessel sink and now need to purchase the right drain... The actual opening measures 1 3/4" and the recess for the flange/trim is 2 3/4". The various drains I've been looking at measure 1 1/4", 1 1/2" or 1 3/4". Am I limited to 1 3/4" drains or can I use one smaller? Also, my...
Vessel sink draining slow
[ 2 Answers ]
I have an ongoing problem with a new vessel sink. Question is there a minimum length between the bottom of the sink and the P-Trap?
Hooking up a vessel sink
[ 1 Answers ]
I'm installing a vessel sink atop an adapted wooden vanity (which started life as a night-table). We're raising the vessel up about four inches by constructing a box for it on top of the surface of the vanity. My question is, can someone show me a diagram of the proper way to extend the drain... View more questions Search
|