Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cast iron vent stack and PVC waste lines
[ 1 Answers ]
I decided to replace the cast iron portions of my waste lines from a double vanity sink to the waste line. Previously a plumber had replaced the accessible portions with PVC so I have quite a mix. Now that I have opened up the wall, I see that I have a cast iron vent stack / hub (see pics: ) that...
Cast Iron Vent Stack
[ 2 Answers ]
I have just purchased a 1950's rental property with a cast iron vent stack. The insurance co. wants me to replace it as they are prone to leaking in older homes. The job seems fairly straight forward, but do you have to replace the elbow/cleanout at the bottom that is cemented into the basement...
Crack in Cast Iron Main soil stack
[ 3 Answers ]
:confused: I just moved into a Bi-level house approx. 40-50 years old. It has a Cast Iron Main soil stack (main vertical sewer line). On the lower level I noticed that it has a crack that is approx 5"-6" long about 1/4" thick. Now I bought a new pluming book because of some other repairs I had...
Cast Iron Main Vent
[ 5 Answers ]
Just looked at a property I want to buy and flip. During inspection, two red flags for me. About a 40' run of cast iron drain pipe is rusted and leaking. All radiators need to be moved to maximize space. Q1: My question is: Is the job of replacing the cast iron to tough for a DIY'er like me?...
Cast iron vent stack
[ 7 Answers ]
I'm installiing a new basement bathroom and when running a vent stack I would like to tap into the existing cast iron with PVC using a saddle on the cast. My question is what method is used to cut a hole in the cast iron, where I wish to place the saddle and connect the PVC. View more questions Search
|