Ask Experts Questions for FREE Help !
Ask
    lemp0005's Avatar
    lemp0005 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jan 21, 2008, 05:15 PM
    Trane XE80 Won't ignite
    My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 21, 2008, 06:10 PM
    Oil or gas or electric furnace
    What are you doing to reset furnace?
    lemp0005's Avatar
    lemp0005 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jan 21, 2008, 08:18 PM
    Quote Originally Posted by lemp0005
    My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?
    It is an gas furnace. To reset it, I either turn down the thermostat and turn it back up again or I flip the switch on the actual furnace off and on. Any ideas?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jan 21, 2008, 09:31 PM
    If your unit has a flamw sensor try to clean it.
    lemp0005's Avatar
    lemp0005 Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Jan 22, 2008, 08:08 PM
    It has worked ever since I cleaned the flame sensor. Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor of Trane XE80 furnace won't start [ 8 Answers ]

I have a Trane XE80 gas furnace. The purge motor and burner go on, but main motor won't run. LED flashing light flashes continuously when burner is on however, when the burner shuts off, the LED light flashes 4 times at an interval. I tried to look for a reset button on the main blower motor but...

Trane xe 80 burner will not ignite [ 3 Answers ]

I have a forced hot air Trane xe 80 furnace. Electronic ignition. At times the burner will not ignite. The fan motor runs and only cold air is coming out. If I turn the furnace switch off then on again, it will glow and then the burner will ignite. This could last for days, then it will do it again.

Trane XE80 Won't Start [ 1 Answers ]

My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?

Trane XE80 Control Board / Booster Fan Questions [ 4 Answers ]

The blower on my parents Trane XE80 gas furnace stopped working this weekend and a local HVAC company diagnosed the problem as a bad control board. The technician didn't have a board on his truck so he temporarily bypassed the control board and wired the fan to stay on 100% of the time until he...

Quote on 2 1/2 ton Trane XR13 and var spd Trane Blower [ 2 Answers ]

I was just quoted on a 2nd floor A/C replacement, condenser and var speed blower, 2 1/2 ton Trane XR13 with upgrade options. Live in CT Are these prices sane ? Includes removal of old unit, upgrade of refrig line, added insulation on old ductwork - work to be done in walkup attic Quote...

View more questions Search