Ask Experts Questions for FREE Help !
Ask
    claude36cdf's Avatar
    claude36cdf Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 5, 2007, 04:20 PM
    Moen spraying hose lost pressure
    Brand New Model Just Been Installed A Few Month Ago . Spraying Hose Attachment Was Working Until A Few Days Ago And Cannot Figure Out What's Wrong. The Model Is A Cartridge Moen Faucet. Please Help Me Out.thank You
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jan 5, 2007, 04:25 PM
    Unscrew the spray head and turn on the water. Is there a strong stream coming out of the hose? Let me know, Tom
    claude36cdf's Avatar
    claude36cdf Posts: 2, Reputation: 1
    New Member
     
    #3

    Jan 5, 2007, 04:45 PM
    Quote Originally Posted by speedball1
    Unscrew the spray head and turn on the water. Is there a strong stream coming out of the hose? Let me know, Tom


    I did what you said and the spry did nothing there was no water at all coming out. Then I put rescrewed the head on the sprayer and the water was running but not full pressure. The rest of the water was running from the tab.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Jan 6, 2007, 06:51 AM
    This tells me the spayer head's OK and that this is a diverter malfunction. Remove the handle. You should now be able to pull the spout up and out. In the fromt of the valve body you will find the diverter. This is a flap that shuts the flow off to the spout when your turn the spryer on. Pull the diverter out and clean the area. Turn the water on for just a instant to flush it out. Reassemble and test. Let me know, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moen one handle , pressure prob. [ 16 Answers ]

Hi, I have a MOEN faucet , ever since I installed it I was never happy with the pressure , now after 8 years it seemed worse so I took it apart to see if the screens were dirty , nothing there , when the handle is not on the flexible hose , I turn on water and I notice that when on the cold side ,...

Lost pressure to pump [ 1 Answers ]

We have an above ground water pump connected to an underground storage tank. We just had the tank filled, but there is no pressure in the pump. How do we re-prime to get it going again? Chuck

Water spraying behind Faucet knob [ 1 Answers ]

I looked over the illustration you sent me speedball1 thank you very much, I also turned the water off, I should have did this the very first day I notice the leak getting worse and then I took off the face plate down to the replacement cartridge I think that's what it is called but that is all I...

Water Pressure - hose bib [ 3 Answers ]

After a driveway contractor used a power washer on our driveway, the hose bib he was connected to lost water pressure. I had the lawn sprinkler on before he came, pressure was great, and put it back on after he left, pressure was at about 50%. The other hose bibs, and all pressure inside the...

Kitchen sink spray hose no pressure [ 1 Answers ]

My kitchen sink's spray hose has no pressure. I replaced the spray head and it sprays but water also comes from the faucet. What can I do?


View more questions Search