Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hunter Thermostat wiring
[ 6 Answers ]
Hello! I seem to have "developed" a problem tonight. I just removed my old manual thermo and labeled the wiring accordingly. It looked the heat hot came into a spot labeled "4". Then it was jumpered to Rc. So when I hooked up the Hunter programmable 44360, there was already a jumper between Rc and...
Hunter thermostat--no AC message
[ 1 Answers ]
I have read other questions and answers but still getting no where===While I do get this message---I have also checked with my meter and am getting voltage back through --but a tad more than the 24.6==actually getting about 26.1--other than that I see nothing wrong--but still get the dang NO AC...
Hunter To Honeywell Thermostat
[ 1 Answers ]
I recently purchase a Honeywell RTH6300B to replace a Hunter 44402 problem is there are only two wires coming out of the wall one White and One Black where do these wires go on this Honeywell? Thanks JIm
Need Help with Hunter Thermostat Please
[ 4 Answers ]
I have a Payne PF1MNC hvac, and just replaced my White Rodgers thermostat (It wasn't blowing hot air or kicking in in Auto mode) with a Hunter 44155C. There were 4 wires attached: G to G R to Rh (with jumper) Y to Y1 W to W And an unattached B I attached them the same to the Hunter:
Rheem to Hunter Thermostat
[ 1 Answers ]
Currently, I'm trying to replace an old rheem thermostat with a hunter Model 44155C. The wiring colors are confusing to a novice like me. There are five wires: red, green, blue, yellow and white. The hunter thermostat has connections for RH, RC, G, Y/O, W/B, and Y1. The only two wires that I... View more questions Search
|