Ask Experts Questions for FREE Help !
Ask
    kingofcrap's Avatar
    kingofcrap Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 24, 2006, 02:23 PM
    Rheem to Hunter Thermostat
    Currently, I'm trying to replace an old rheem thermostat with a hunter Model 44155C. The wiring colors are confusing to a novice like me. There are five wires: red, green, blue, yellow and white. The hunter thermostat has connections for RH, RC, G, Y/O, W/B, and Y1. The only two wires that I am relatively sure that go together are the yellow to the Y/O and the Green to the G. If anyone can help, I would greatly appreciate it.:confused:
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Nov 25, 2006, 06:54 AM
    Try this https://www.askmehelpdesk.com/heatin...ons-40771.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter Thermostat wiring [ 6 Answers ]

Hello! I seem to have "developed" a problem tonight. I just removed my old manual thermo and labeled the wiring accordingly. It looked the heat hot came into a spot labeled "4". Then it was jumpered to Rc. So when I hooked up the Hunter programmable 44360, there was already a jumper between Rc and...

Hunter 44110 Programmable Thermostat Wiring HELP! [ 3 Answers ]

My current thermostat has the following six wires, hooked as follows: Orange to O Green to G Yellow to Y1 Red to R Black to C White to W1 I am attempting to install the Hunter Programmable thermostat, which only gives me 5 placements for wires:

Honeywell RTH 7400 Thermostat wiring for Heat Pump (Rheem) [ 2 Answers ]

I am trying to hook up a Honeywell RTH 7400 Tstat to the existing Rheem HVAC in my house. Currently using Rheem thermostat that came with the house (non-programmeable, using mercury tubes). Heating is provided by a heat pump as well as Natural gas furnace for aux heating (besides the air...

Honeywell thermostat heat/cool in Rheem 2 stage furnace? [ 1 Answers ]

I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the...

Wiring Question for Hunter programmable Thermostat [ 7 Answers ]

Hey there, I'm hoping someone can help me with this. OK I have a Hunter Programmable Thermostat Model #44360. When I hook it up the fan works, it kicks on when it should at the right temp, however it's blowing hot. The color wires that are hooked up with my old thermostat are: White, Blue, Green,...

View more questions Search