Ask Experts Questions for FREE Help !
Ask
    nyrfan94's Avatar
    nyrfan94 Posts: 6, Reputation: 1
    New Member
     
    #21

    May 22, 2007, 11:26 AM
    Seems like sometimes they go away for a while sometimes they don't but I don't fantasize about same sex when I get off.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #22

    May 22, 2007, 12:00 PM
    My guess is you aren't getting off enough.

    Seriously, I would think if you are truly Bi or even gay your feelings towards guys would not change in the period after you get off, when you are horny all sorts of thoughts may go through your mind. Its in the 15+ minutes after the fact that your head is cleared of that. In the manner as my feelings towards women do not go away after I get off.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

2-phase vs 3-phase degrees of separation [ 5 Answers ]

At work we have 3-phase power. I understand the oscillations are 120 degrees apart. At home I have 2-phase power. Are the oscillations 180 degrees apart? I understand the neutral on a 240v circuit should carry 0 as the phases cancel each other out. My real question is that if we have a...

Three phase vs. Single phase [ 3 Answers ]

What benefits would you have running a three phase service as opposed to running single phase.

3 Phase vs. Single Phase [ 8 Answers ]

I am struggling with the difference between 3-phase and single phase and the advantages/disadvantages to both. Could someone help me with this, or point me in the right direction. Any help would be greatly appreciated. Thank You.

My gay friends tell me my new love interest is gay [ 11 Answers ]

Hello everyone. Im new to this service. I am a 32 year old female, who has been dating a 26 year old guy for about 2 months. I met him about a year ago, and up until 2 months ago, really only hung out with him with our other friends. We both knew there was something there, had not had the...

How am I going to size my 3 phase X'mer with 1 phase load using current as reference [ 3 Answers ]

Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping


View more questions Search