Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shark Bite Angle Stops Won't Turn On
[ 13 Answers ]
I had two Shark Bites ½” to 3/8” angular shut off valves installed by a professional plumber. The plumber just installed the hot and cold valves and left them in the OFF position. I installed a new faucet and flexible braided tubing. Now I try to turn the 1/4 valve to the ON position and they both...
Low pressure at kitchen sink after turning the angle stops back on
[ 8 Answers ]
I shut the angle stops under the kitchen sink and let the faucet drain. This seems to have drained the air chamber and solved the water hammer problem but now the pressure is very low. I took off the faucet head and checked the flow, the pressure is still low. Any suggestions?
Aquaflow 1/4 turn angle stops
[ 1 Answers ]
I installed 1/4 turn tops on sinks. The inspector says I need to remove the 1/4 turn stops and install Aquaflow 1/4 turn angle stops. What is the difference? Is Aquaflow a brand name? Are there manhfacturers?
Angle Stops Problems?
[ 1 Answers ]
I have a bathroom sink that has no water, only a drip coming from it. It's a standard 2 handle faucet. While reading other questions, it occurred to me that my problem may be the angle stops being clogged. If this is the case, can I unscrew the valve at the point where the red arrow is in the...
Frozen angle stops
[ 1 Answers ]
I can't shut the water off under my bathroom sink. Is their a way to free them up without replacing them? View more questions Search
|