Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #21

    Dec 20, 2011, 04:26 PM
    Sorry steve, I don't give out that info, Im sure you can understand. However, It sure looks like that flame is getting pretty carried away from the pics. At this point, it really looks to me like this could be a very large safety concern, beyond me even giving any more advice, other than checking gas pressures, making sure the furnace is set up for the correct gas, and finally, it really may be time to get a pro in there to take look and do a hands on trouble shooting of the furnace. That flame is getting way to close to the gas valve (or at least it appears that way in the pics). Time to play it safe and call in a tech. Sorry I couldn't be of further assistance. I really thought we had it nailed. Good luck and let me know how things work out.
    irenesteven's Avatar
    irenesteven Posts: 12, Reputation: 1
    New Member
    		  
    #22

    Dec 23, 2011, 05:04 PM
    Hi mygirlsdad77,

    Thank you all your help. Maybe the used pilot light assembly I got from eBay is also bad. I think I'm going to give another try with a brand new pilot light assembly. I will let you know if that will make a difference.

    Thank you again,
    Steve
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant spark ignitor [ 5 Answers ]

This Bryant furnace stumped me. It sparks, pilot comes on and burners come on for about 20 seconds and goes off. I have changed the Flame sensor in front of pilot flame. The Flame sensor has a white wire going to a Spark Power pack, and the red wire goes to the spark rod. I get the same result...

Honeywell central heating not working blowing cold air constantly [ 0 Answers ]

Hi, we have a honeywell central heating system. Yesterday it started blowing cold air, and would not stop, even when turned off. When the temperature is set, it will not heat the house, but continues to blow cold air throughout the house. My husband tried to turn it off and was unsuccessful. Please...

Furnace blower won't stop and blowing cold air [ 11 Answers ]

I've just gotten a new Carrier 2 1/2 ton heat pump 15 seer. It has an edge programmable thermostat. If I have the thermostat set to 66 degrees and up it to 67 the heat comes on and the blower starts. Almost immediately the thermostat shows 67 degrees and the blower will continue to run for over...

Furnace blower won't stop and blowing cold air [ 1 Answers ]

My system is blowing out cold air and the blower never stops runnning. I have a traneTWE060D150B0. The auxiliary light is constantly on. Don't know where to start. Can't tell if it's the thermostat malfunctioning and not allowing heat. If I bypass and connect few different wires and can make...

Furnace blower on, blowing cold air [ 4 Answers ]

We installed a pellet stove with the intent of using the furnace blower to distribute the air throughout the home, however, nothing but cold air comes through the vents. Can anyone tell me why this is ?

View more questions Search