Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    glassjunkey's Avatar
    glassjunkey Posts: 12, Reputation: 1
    New Member
    		  
    #21

    Jan 26, 2011, 08:18 AM
    Comment on ballengerb1's post
    I went under house and found the air pendlem box rusted out on bottom
    glassjunkey's Avatar
    glassjunkey Posts: 12, Reputation: 1
    New Member
    		  
    #22

    Jan 26, 2011, 08:20 AM
    Comment on hkstroud's post
    Thermostat wear you set the temp is in hallway it shows 69 on both side it donest drop before it kicks back on
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #23

    Jan 26, 2011, 11:17 AM

    Fix the plunum and most all of your issues will go away. You can patch it but a contractor will have insulated duct material and tools to do the job. I'd get 3 bids from contractors before tackling it myself.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heating problems [ 2 Answers ]

OK I have a 2001 carrier 58rav downflow furnace. The wheel on it was making noise for about a week or so and now it is flashing code 31 I try to reset it by turning off the power turning the thermo stat down wait 20 min and then turn everything back on. Then it makes a wineing noise and then does...

Heating problems [ 1 Answers ]

My furance works and heats the up stairs but does not seem to heat the down stairs. What steps do I need to take?

Heating problems [ 2 Answers ]

I am having trouble with my heater. It kicks on, the burners are lit and the motor is on, but no air comes out the vents. Why is that?

Heating Problems [ 4 Answers ]

Hi. Our heater would not come on this morning. We tried turning it off and then on again but it did nothing. What could be the problems?

Heating problems [ 2 Answers ]

I have a very old GE gas furnace model # BLU080E924B1 that doesn't want to work on auto. Thermostat seems fine, but unit won't run unless I connect gas valve and blower directly. I installed a new relay, new fan/limit control and new transformer. I don't understand why it doesn't work on auto.

View more questions Search