Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    knarf13's Avatar
    knarf13 Posts: 11, Reputation: 1
    New Member
    		  
    #21

    May 18, 2010, 06:08 AM

    It's still cooling OK, so I think I'm good. It's a 17-year old unit that's getting replaced before the year is up anyway, so I'm going to risk it and cross my fingers that it gets me through the summer.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing contactor on our heat pump [ 5 Answers ]

My husband is changing a 1 pole contactor to a 2 pole contactor on our air conditioner. The problem is he is not sure which wires go where. Could you please help.

A/C Contactor not pulling in - Lennox [ 3 Answers ]

A/C unit - It is a Lennox HS9-511-4P. The Control Relay is clicking when the A/C is turned on at the tstat but the Contactor is not pulling in. I have tested the fuses and they are fine. I have toggled the breakers. If I manually push-in the contactor, the compressor and fan work and I get cold...

Heat pump contactor sticking [ 1 Answers ]

I have been told my old trane unit has a contactor problem- the indoor fan runs but the outside unit comes on sometimes but not always- an a.c. guy came out and scraped the contactor a little and that seemed to help for a day or so and then it started acting erratic again, but not near as erratic...

Electric heat pump auxilery heat problem [ 4 Answers ]

Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not....

View more questions Search