 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have had the same issue with my Goodman furnace. I turned to be the flame sensor. It is located in the left most flame and it looks like a piece of wire. Take it out and clean it with sand paper to get the scale off. It is recommended that you replace it but this should get you by for now.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
As stated my gas furnace will not ignite. Looked on main board no blinking lights. Everything is connected pretty firm. I can hear it blowing from the induce blower but no igniting. I hear gas coming just won't ignite. I checked the ignitor, it has some white spark residues. Seems still good....
I have two goodman furnaces. They both heat up, but, they both have erratic or uneven sounding flames. They run for a while and then click the flame sensor snap switches off. What would cause this, especially same problem on 2 different units?
Goodman heater model GMT090-3B problem ignator staying on not droping out after burner comes on. Have changed board ,checked polarity cleaned flame sensor. Any suggestions.
Hi , my goodman furnace gmp075 3 furnace ,inducer turns on ignitor glows ,burners fire for about 5-7 sec,then turn off blower doesn't come on,but if I let it cycle about 5 times then the blower does come on and it works fine,can anyone tell me what's wrong, thank you
Had a Heating Co. check my furnace. They found heat exchange cracked at heat exhange-burner entry venturi point and main center roll out missing. They said we should replace. Does that sound correct? Is the furnace safe to run?
View more questions Search
|
