Ask Experts Questions for FREE Help !
Ask
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #21

    Dec 28, 2009, 07:01 PM

    I think you got short changed in the DIP tube department. 1/2 the heater isn't enough. Time to go above GE for complaints, meanwhile I think you need a longer tube.

    How a water heater dip tube works and what it looks like.

    Length of dip tube? - Self Help Forums

    Cut to length DIP tube
    Law Supply - Water Heate Parts and Accesories
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
     
    #22

    Dec 28, 2009, 07:34 PM

    That dip tube being only half way down the heater is not enough. Admittedly, I have only pulled a few dip tubes, but they should go almost to the bottom. That swirl action is to get the water moving around the heat source so that it all heats evenly. I don't use GE water heaters so I can't speak to customer service.

    Sorry, I didn't see post #21. My browser dropped me on the second page.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New hot water heater installed, but no hot water pressure. Plenty of cold water? [ 11 Answers ]

Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....

No water in hot or cold bathroom sink after flushing my gas hot water heater [ 5 Answers ]

Thank you. I flushed my hot water heater last night. I only turned the cold water intake to the heater off and on BUT now, after the flush, my second floor bathroom sink faucets (both hot and cold) don't work at all. The shower and the tub in the bathroom work but NOT the sink- HELP! Thanks so...

Installed new hot water heater but still no hot water just cold water [ 1 Answers ]

We installed a new hot water heat and we still do not have hot water. We were having our bathroom remodeled at the same time the water heater went out. So now the plumber is saying that the contractor probably put one of the faucets in the bath room backwards so it is prventing the hot water to go...

No hot water in shower and water heater affects both cold and hot water flow [ 1 Answers ]

1. No hot water coming from shower even though there is hot water coming from face basin in same bathroom and throughout the house( moen plumbing) 2. when water heater valve to house is turned off the cold water and hot water from shower does not flow, yet in other faucets throughout the house...

Gas Hot Water Heater runs out of water [ 4 Answers ]

I have a 2 year old Gas Hot Water Heater in my house 50 gallon I believe. It runs out of water after about 5 minutes and the water does not seem as hot as it should be (It's turned to 3 on a max scale of 4 on the heater). The pilot light is on. Can you tell me what might cause the hot water to...


View more questions Search