Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #21

    Nov 5, 2009, 08:47 PM
    Yes, and usually sideways. If the HP isn't listed, post the complete product #.
    rockysdad1's Avatar
    rockysdad1 Posts: 12, Reputation: 1
    New Member
    		  
    #22

    Nov 5, 2009, 08:49 PM

    KC13... OK, thanks I'll check for that...
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #23

    Nov 5, 2009, 08:58 PM
    Did you ever perform the status code recall that I mentioned earlier? It would provide more valuable clues...
    rockysdad1's Avatar
    rockysdad1 Posts: 12, Reputation: 1
    New Member
    		  
    #24

    Nov 5, 2009, 09:08 PM

    I know it gave me codes for ignitor lockout ~ 14 or 41 ~ something about calibrations... I'd have to look I know what they were whenever I look at the door...
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #25

    Nov 5, 2009, 09:11 PM
    If you read the whole "SERVICE" label, it will describe the procedure. The thing is, stored codes will be auto-erased after 72 hours if they don't recur.
    rockysdad1's Avatar
    rockysdad1 Posts: 12, Reputation: 1
    New Member
    		  
    #26

    Nov 5, 2009, 09:19 PM
    OK, thanks!!
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sporadic Bryant Evolution furnace shutdown problems upon startup [ 7 Answers ]

Hi All, I recently had a Byrant 95% efficiency Evolution Furnace and air conditioner installed a few days ago. I am already having problems with the system that are only occurring sporadically. Sometimes, the system will shut down. I have watched the sequence of operations (inducer motor,...

Bryant Furnace Blower Motor Problems [ 1 Answers ]

I have a Bryant 80 furnace. As louck would have it the blower motor just went and of course it is within a year of the warranty expriing. Does this seem right?

Bryant Furnace Problems [ 3 Answers ]

I have a Bryant gas furnace Model Plus 90i 355MAV. When it runs in high heat mode for several minutes it makes this thumping sound that seems to be coming from the blower area, after a couple of seconds the furnace shuts down. Any Help? Unit is about 6 years old

Bryant Furnace problems [ 14 Answers ]

Hello everyone, I have a Bryant 80v furnace. Everything works fine till it is time for the blower fan to come on. I have opened it up, and the fan wheel turns freely. Checked the fuse on the circuit board no problems there. I been doing some reading about it all day long. The furance lights and...

View more questions Search