Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    Brickdaman's Avatar
    Brickdaman Posts: 1, Reputation: 1
    New Member
    		  
    #21

    Oct 8, 2012, 05:00 PM
    I had the same problem and I just tapped all sides of the handle to loosen a bit. It came off.
    gypsydoctor's Avatar
    gypsydoctor Posts: 4, Reputation: 1
    New Member
    		  
    #22

    Mar 22, 2013, 09:36 AM
    I once used an angle grinder (power tool) with a cut-off wheel to remove a badly stuck handle without damaging the spindle or its splines.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Symmons Temptrol Shower Valve - Cold Water Only [ 2 Answers ]

I have several 10 year old Symmons Temptrol Model A shower units. One has recently stopped all hot water. A second is warm at best. I was told by a friend (not plumber) that I need to replace the mixer valve or the part that stopps scolding. The reason being is the part wears out and defaults to...

Stuck on a Symmons Temptrol Cartridge Replacement [ 3 Answers ]

Hello, I have a 10 year old plus Symmons temptrol shower/bath unit. I have removed the handle and the face plate. Now I'm down to the part number shown in the image below part # T-11 . It won't budge. I'm curious if I should crank on this and it will turn or pull it straight out. Any...

Symmons temptrol valve on shower/tub [ 5 Answers ]

I can only get hot water from this brand new valve. Yhe only way to get cooler water is to reduce the valve to a point where I get very low flow. Increasing the flow to a satisfactory flow only gives hot water. The water coming in is at 130 degrees F. I can not change the temp of the water coming...

Symmons Temptrol Shower/Tub Handle - [ 1 Answers ]

I printed off the internet the part breakdwon to my tub/shower one-dial Symmons Temtrol kit as I am trying to stop a slow leak out oif the tub faucet. I removed the screw and cap - and I can't get the handle off - is it hyst suppoosed to pull off once the screw is removed? That is how the...

View more questions Search