Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #21

    Feb 26, 2009, 09:10 PM

    Hi Weldon,

    You say the heater is instllaed in 2004, I found the following link, your heater has 6 years warranty on parts and the tank, it doesn't hurt to call sears and talk to them, see what they say,also open the 2nd link it is owner manual will show where to set your gas valve, and if need any more trouble shooting good Luck.

    John

    Kenmore Power Miser 6, 40 gal. Gas Water Heater - Model 33064 at Sears.com

    http://c.sears.com/assets/own/33064e.pdf
    weldon245's Avatar
    weldon245 Posts: 7, Reputation: 1
    New Member
    		  
    #22

    Mar 9, 2009, 04:49 PM

    Afaroo/Mygirlsdad/Milo/Ballengerb1,

    Thank you all so much for the help. I have Sears coming to take a look. I did learn a lot though already. Appreciate the help.

    Thanks
    Jimmy
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #23

    Mar 9, 2009, 05:00 PM

    Great ! Let us know what was the problem...
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #24

    Mar 11, 2009, 03:42 PM

    Yes, please let us know what they find.
    ezra foster's Avatar
    ezra foster Posts: 4, Reputation: 1
    New Member
    		  
    #25

    Mar 11, 2009, 04:26 PM
    Dear Sir/Madam,
    I have a sayco 300 bath and shower mixer,it was leaking water, when I shut off it still keep dripping, I change the washers on both the hot and cold tap, and also the washer
    That valve that change from bath tub to shower,now I start back I am getting water when I turn on the shower,and water coming from the tub pipe as well,please help me,
    Ezra
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower issues-scald guard or pressure problems? [ 5 Answers ]

We moved into our 90 year old home in April. In 2001 a nice addition was put on that included a master bath with tile surround and 2 showers in the surround. I noticed at first that when I pushed the handle all the way to the hottest setting (on both showers), the water cut off all the sudden to...

Moen Tub/Shower Issues [ 2 Answers ]

I bought a new house with more bathrooms than I can use. The warranty from the builder is up and I have found a problem with one of the bathtubs. It has a Moen fixture (believe it is a positemp with 1222 cartridge) The problem was I could only get cold water from it and when I turned the handle...

Tub/shower drips, clogs and other issues. [ 2 Answers ]

My shower has had a slow leak coming from the tub spout &/or the shower massage head (depending on the position of the diverter). It's been like this for years, but has become a much more steady drip in the past couple of days and I'm concerned about the loss of water and whether this drip is...

No water and other issues in shower.. [ 5 Answers ]

Edit: I meant to say no HOT water First off, great forum - glad I found it. I moved into a 5 yr. old home recently and have some issues with my full basement bath. The first problem is I had a leak in the shower head and I did fix that (shower head did not have tape on the threads). The...

View more questions Search