Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant Furnace model 383KAV won't kick on
[ 10 Answers ]
I'm not getting any error led blips from the computer board. I can only see one limit switch which isn't tripped. I replaced the thermostat but that wasn't it. I've checked breakers and even tried tripping them off and then back on. Usually if I remember right this furnace goes through a...
Bryant 395C furnace does not kick on
[ 2 Answers ]
Everything is on, thermostat is set, furnace had been working but now it randomly decides not to turn. Now here is the kicker. If I turn off the power at the breaker and then turn it back on, or release the blower panel safety switch and then push it back in, or turn off the switch right at the...
Bryant furnace flame won't stay lit after a few minutes
[ 8 Answers ]
I have a Bryant Plus 80 model 395C that is 17 years old. I turned the furnace on this weekend and it starts up just fine. The draft blower starts, the igniter glows, the valve opens and it lights the burners. After it heats up the blower comes on as always. After about 3-5 minutes the burner goes...
No heat. Bryant 383k upflow gas furnace
[ 1 Answers ]
12 yr old Bryant 383k upflow gas furnace. When first starting blowers run through three cycles then furnace locks out. Tried reseting Darft Safegaurd tube switch and Manual Reset Limit switch. Replaced filter. Have other gas appliances that work fine. View more questions Search
|