Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    jeaniebird's Avatar
    jeaniebird Posts: 2, Reputation: 1
    New Member
    		  
    #21

    Jan 25, 2009, 02:38 PM

    LuxTX1500b is locked. How do I get it to operate/
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #22

    Jan 25, 2009, 03:41 PM
    http://www.luxproducts.com/ART/suppo..._WebManual.pdf

    Page 3 left side PROGRAM LOCK
    MarkwithaK's Avatar
    MarkwithaK Posts: 955, Reputation: 107
    Senior Member
    		  
    #23

    Jan 25, 2009, 03:47 PM

    Before you go to the expense of calling in for service you might want to consider cleaning the crossover ignitors first.
    jerry007's Avatar
    jerry007 Posts: 11, Reputation: 1
    New Member
    		  
    #24

    Jan 28, 2009, 07:00 AM
    Quote Originally Posted by MarkwithaK View Post
    Before you go to the expense of calling in for service you might want to consider cleaning the crossover ignitors first.


    Sorry for the delay in answerind my PC has been down. I did blow out the crossover ignitors and almost everything else for that matter and this seemed to do the trick. It has been running great now

    Thank you all for your help.

    jerry007
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #25

    Jan 28, 2009, 08:58 AM
    Glad you got it going.
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace ignites but blower won't start till furnace shuts down. [ 7 Answers ]

(Nordyne/Miller G3RA)-I have a furnace HSI(glow plug) that will ignite and burn until it gets too hot and shuts down. As soon as the furnace shuts down the blower starts to circulate air. The blower circulating air cools the furnace and it reignites.Shortly after the furnace ignites the blower...

Furnace shuts off gas [ 1 Answers ]

My furnace randomly lights both sides. After the igniter comes on, the gas kicks in on the igniter side but not on the temp. probe side. It seems that the gas doesn't flow over to that side after it comes on. Is it a blocked valve or gas jet?

Furnace shuts off [ 1 Answers ]

I have a goodman funace model number gmp100-4. The problem I am having is it turns on then turns right back off. I removed the inspection cover to look at the pilot lighting switch which seems to be OK but seen some corrosion on the gas line switch pretty sure that this is the problem but wanted...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

Furnace shuts off [ 2 Answers ]

My oil furnace will shut off during the day or evening. I can usually get it going again by pressing the restart button. Even then, sometimes it won't click in, sometimes it will run for half a minute and shut down. If I restart a few times with very short runs, it evventually will run for an hour...

View more questions Search