Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #21

    Oct 1, 2008, 10:59 AM
    Single and two speed??

    Do you have the model numbers?

    One place quoted me $300 more for the 2 speed, while another quoted me $1,100 more. Why?

    Because they felt like it. Did you ask them why?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #22

    Oct 1, 2008, 03:22 PM

    The 300 bid sounds like just the extra cost of the furnace. The 1100 may be because of different brand of furnace. When you say two speed, I assume you mean two stage. Two stage heating systems are more efficient than single stage. What brands were they quoting.
    carrier_helpme's Avatar
    carrier_helpme Posts: 2, Reputation: 1
    New Member
    		  
    #23

    Dec 12, 2009, 12:45 AM
    My circuit board model:302075-354 can I replace with model # HH84AA020 ?
    PLEASE HELP ME

    Thank you FOR YOUR HELP

    Quote Originally Posted by hvac1000 View Post
    If this is something I can't fix myself and need to contact a Carrier repairman, so be it.

    So be it.

    It could be the relay on the circuit board BUT it may not and without knowledge of testing and tools you might be tossing your $$$ away.


    ICM 271 Control Board
    Replaces HH84AA020, HH84AA010,HH84AA011, HH84AA012,
    HH84AA013, 58GS302075354, CESO110017,
    CESO110018, 302075-302, 302075-303, 302075-304, 302075-352,
    302075-354, P771-7002, P771-7001,
    Robertshaw 695-100

    Click to enlarge pic
    This board works in Carrier, Bryant, PayneDay and Night Furnaces with the factorynumbers listed above. Bryant 394 GAW SIand 394 GAD Model Furnaces. 396GAW, 58GP, 58DP, 58DR, 394GAD, 396GAY, 396GAZ, 394AAD, 58GS, 394GAW, 396GAD,SIZE394JAZ , 396JO, 396JAW
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #24

    Dec 12, 2009, 07:37 AM
    Look here and see what it says

    Carrier Circuit Board HH84AA020 [HH84AA020] - $72.00 : Shortys HVAC Supplies, Short on Price, Long on Quality! - Indianapolis, IN
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier Air Handler - Blower Won't Shut Off [ 3 Answers ]

I have a Carrier heat pump package unit with a Carrier air handler, both from late 70's/early 80's (Model number illegible on sticker). When the weather was cold a couple of months ago, the blower would run constantly, making the house unbearably hot. Turning down, turning off, or disconnecting the...

80% carrier furnace [ 2 Answers ]

I have a 80% Carrier furnace! I have to shut off the power some times for it to start up again! Then I have to turn the thermostat way up for it to go!! Do I have a bad stat or do I need to replace the ignighter and or the glow plug?

Carrier furnace blower no shut off except power [ 3 Answers ]

I have a carrier furnace. The blower is not shutting off, even when the thermostat is set to off. Could it be the thermostat unit? The relay? The circuit board on the carrier? A fan switch somewhere? Where is the best place to start diagnosing this problem? And in what order should it be done? ...

Carrier furnace blower fan doesn't shut off [ 1 Answers ]

Hi my carrier furnace the blower fan that circulates air through the duct work doesn't stop running Thanks jim

Carrier Durakool Air Conditoner shut down abruptly with error 'E7'. [ 1 Answers ]

I have Carrier Durakool Air Conditioner 1.5 Ton. What happes sometimes is that out the blue, while running, the conditioner shuts down and on the display an error message is see E7. After couple of hours, and after restarting, AC works fine again. What is this? Why does it come? How to go about...

View more questions Search