Ask Experts Questions for FREE Help !
Ask
    philandkath's Avatar
    philandkath Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 23, 2007, 04:37 PM
    tub to shower conversion
    We need to remove a standard 32x60" tub and convert to a shower which was already over the tub and has the plumbing in place. Is it possible to use the existing tub drain and simply slope the shower floor.? It is an existing concrete floor with a stud and drywall walls which are currently tiled we are able to match the tiles so that isnt a problem. Do I need to "tank" what would be the tray area the last 6 inches or so?Thanks

    :)

Check out some similar questions!

Tub/shower to shower only remodel [ 6 Answers ]

We have a tub/shower setup in our master bath and would like to remove the tub and install a shower only. After removal of the tub, what would be the best way to install a shower base? This tub is on the second floor with access to the drain from the laundry room below. We would like to have the...

Tub to Shower Conversion [ 4 Answers ]

We need to remove a standard 32x60" tub and replace with a shower. Is it possible to use the existing tub drain and simply slope the shower floor or is it essential to have the shower drain in the center? Thanks

Shower to Bathtub Conversion [ 3 Answers ]

We're redoing our bathroom in the basement and want to take out the shower and cupboard and replace it with a bath/shower unit. Is there an easy way to convert the drains. The shower drain and where the bathtub drain would be are not in the same place. How can we "move" the drain?

Tub to shower conversion/drain installation in slab [ 3 Answers ]

I live on the 2nd floor of my condo and tore out the old bathtub to replace it with a shower. Here's what I know: the floor is concrete slab and there is an approx 1.5' x 2' cutout for the original plumbing installation. The plumbers installed the piping to fit the tub and then poured in cement...

Cannot redirect water from tub to shower in Bathroom tub water fixrure [ 1 Answers ]

I have a Mohen bathtub fixture. When pulling the stem on the spout to change from bathtub to shower, water does redirect to the shower head but continues to flow from the tubspout. I have removed the spout and the shower head and the water flows properly (from both) Could someone please advise...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.