| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
How can you insulate a roof that is beams, a layer of plywood and corrugated tin?
 [ 1 Answers ]
 We have a roof built of 4" x 6" beam at about a 3/12 pitch, on 36" centers. Those are covered by a layer of 3/4" plywood which is covered with corrugated metal. I would like to add insulation on the under side. Either tack Styrofoam board to the underside of the plywood, then cover with bead... 
50% damage to your roof > Is insurance required to pay for a roof?
 [ 2 Answers ]
 The insurance company told me I have 50% damage. I have heard 50% damage = a new roof 
My roof has a layer of ice building on the inside of the roof,I'm wondering why?
 [ 3 Answers ]
 Weeks.would love to here if this has happin to anyone.. I am new to this fourm... 
I am building a truss roof over a flat roof.the size is 9'wx9'd.where do I begin this
 [ 2 Answers ]
 I am building a gable roof over a flat roof at our church.It is 9'wx9'l.How do I determine the height of the center rafter? 
Small roof to protect heat pump from snow off metal roof
 [ 5 Answers ]
 We are getting a metal roof put on our old house. This means that the snow will slide off and land onto our air source heat pump. We need to construct a small roof to protect it. We were thinking of extending the 2 x 6 roof rafters another 4 feet and then having 2 x6 or 4 x 4's going back to the... View more questions Search 
 |