Ask Experts Questions for FREE Help !
Ask
    kljland's Avatar
    kljland Posts: 38, Reputation: 1
    Junior Member
    		  
    #1

    Apr 30, 2014, 02:54 PM
    Identify fuel system part
    97 Integra on fuel rail opposite end from pressure regulator.
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #2

    Apr 30, 2014, 02:58 PM
    Post a picture
    kljland's Avatar
    kljland Posts: 38, Reputation: 1
    Junior Member
    		  
    #3

    Apr 30, 2014, 03:01 PM
    Trying to figure how how. I tried copy and paste did not work
    kljland's Avatar
    kljland Posts: 38, Reputation: 1
    Junior Member
    		  
    #4

    Apr 30, 2014, 03:02 PM
    Attachment 45982
    odinn7's Avatar
    odinn7 Posts: 7,691, Reputation: 1547
    Entomology Expert
    		  
    #5

    Apr 30, 2014, 07:55 PM
    Your picture isn't working for me but what you're talking about is probably the fuel damper. On one side of the rail you would have the pressure regulator which has a hose coming off it as a fuel return line. The other side has a hose going to it which is the feed line and it goes to a fuel damper which regulates pulsing of fuel as it enters the rail.
    kljland's Avatar
    kljland Posts: 38, Reputation: 1
    Junior Member
    		  
    #6

    Apr 30, 2014, 08:37 PM
    Quote Originally Posted by odinn7 View Post
    Your picture isn't working for me but what you're talking about is probably the fuel damper. On one side of the rail you would have the pressure regulator which has a hose coming off it as a fuel return line. The other side has a hose going to it which is the feed line and it goes to a fuel damper which regulates pulsing of fuel as it enters the rail.
    It it has a plastic cap on it
    odinn7's Avatar
    odinn7 Posts: 7,691, Reputation: 1547
    Entomology Expert
    		  
    #7

    Apr 30, 2014, 09:45 PM
    Ok, like I said...
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #8

    May 1, 2014, 05:15 AM
    Quote Originally Posted by kljland View Post
    It it has a plastic cap on it
    The best clue yet: plastic cap. That is a test port for the technician. You can test fuel pressure here or attach a fuel injector cleaner here.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Identify my childhood (FORGOTTEN) anime movies! Part 2 [ 1 Answers ]

Thanks everyone for helping me find animes like (Gall Force, and Space Transformer). If you can, plese, also find these... Thank you very very much! 1. anime)In this movie I remember, 1 guy/man/boy was (this is a opening scene I'm sure! ) was in a VR simulator, he was wearing a helmet (black...

Can't identify part [ 1 Answers ]

I pulled this off the end of my positive battery cable I can't seem to find what its called or something that resembles it. I know that at least one of the wires that go into it control my automatic seat belts. The brown piece is what the wires plug into then the brown piece connects to the black...

Need to identify this part [ 6 Answers ]

Hello, I have this shower, the porcelaine handle is broken and I cannot identify the make to find the part. Here is the picture, the handle in the red circle is broken Thank you for your help. Gege http://www.usa-swiss.com/shower-handle.jpg

97 honda passport fuel system too lean mass bad air flow system [ 1 Answers ]

I have a 1997 Honda Passport with the 3.2 V6 which I am trying to fix. The OBD2 is saying the fuel trim system too lean (cylinder bank 1 code # P0171) and the mass air flow system performance problem code#P0101. I am not sure what it is that is wrong. Can someone tell me where to start?

View more questions Search