Ask Experts Questions for FREE Help !
Ask
    Benzsty's Avatar
    Benzsty Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2013, 07:38 PM
    Thermostat or furnace problem?
    New condo only a few years old. Thermostat set at 70 degrees. Go to bed and wake up its 65 degrees in the condo and thermostat is set to 70. Freezing my buns off here. HELP!!
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Feb 20, 2013, 08:32 PM
    Is the furnace running when you get up? Is this a new problem? Is it unusually cold outside?
    Benzsty's Avatar
    Benzsty Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Feb 20, 2013, 08:37 PM
    Nope it is not on when I wake up.
    Brrrr. It's frigid here in Michigan. Just moved into this condo a few weeks ago.
    Benzsty's Avatar
    Benzsty Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Feb 20, 2013, 08:38 PM
    Quote Originally Posted by Grady White View Post
    Is the furnace running when you get up? Is this a new problem? Is it unusually cold outside?
    No
    Just moved in a couple of weeks ago so it has been here since I moved in.
    It is freezing outside.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #5

    Feb 20, 2013, 08:55 PM
    What do you have to do to make the heat come on? Are you sure the stat is still set for 70 & is not programed to set back to a lower temperature at night?
    Benzsty's Avatar
    Benzsty Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Feb 20, 2013, 09:00 PM
    Quote Originally Posted by Grady White View Post
    What do you have to do to make the heat come on? Are you sure the stat is still set for 70 & is not programed to set back to a lower temperature at night?
    Yes it's set to hold temp. at 70.
    Also came home today and it was at 65 and stat was set to 70.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #7

    Feb 20, 2013, 09:19 PM
    If the condo has a maint. Person, I'd get them to look at the heater. If they don' have any maint. People, you may have to call your own.

    Can you get the heat to come on by turning the stat up? If so, it could be an error in the stat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

Thermostat or the Furnace Problem [ 0 Answers ]

I have Lenox system with Honeywell Programmable thermostat. My Ac and furnace work fine. Only problem with furnace is if I feel cold in the house and if I raise temperature few degrees on the thermostat, I can hear my furnace starting. After about 5 seconds, it will turn off. After about 3-4...

Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace [ 1 Answers ]

I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...

Thermostat turns on furnace and then thermostat shuts back to HOLD [ 7 Answers ]

I believe that when we re-run the program with the correct date and time, if the temp has to go up, the furnace runs until it gets the appropriate temp, then it turns off and when it does that, the thermostat also turns off going to the HOLD state.:confused:

View more questions Search