Ask Experts Questions for FREE Help !
Ask
    Danna1416's Avatar
    Danna1416 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 18, 2012, 07:34 AM
    Ladylux worked fine for 20 years
    After 20 years the ladylux decided to spray a narrow hard spray. We have to turn the water on very slowly because it will spray all over the place. The adjustment on top of the Handel still works but I don't have a soft narrow flo any longer and can't get it back. I'm pretty handy what can I do to fix it? Do I need a new cartarage?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Aug 18, 2012, 06:21 PM
    Are you talking about the water coming out the spout or does the faucet have a side spray nozzle and you are talking about the water coming out there.
    Danna1416's Avatar
    Danna1416 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 19, 2012, 05:11 AM
    Quote Originally Posted by hkstroud View Post
    Are you talking about the water coming out the spout or does the faucet have a side spray nozzle and you are talking about the water coming out there.
    I do NOT have a side spray, the water flow out of the faucet is the problem. Thanks for getting back to me.
    Danna1416's Avatar
    Danna1416 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Aug 19, 2012, 05:16 AM
    Quote Originally Posted by Danna1416 View Post
    I do NOT have a side spray, the water flow out of the faucet is the problem. Thanks for getting back to me.
    I took the faucet apart and the screen was clean, from the diagram that came with the Grohe :Ladlux shows a value at the base of the faucet that adjusts the pressure of the water flow. I can't imagine it would all of a sudden need adjustment after 20 years of usage.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #5

    Aug 19, 2012, 06:23 AM
    Please post model number or pic of the parts break down.

    What happens if the aerator on the end of the spout is not used?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No water in hot tap, but worked fine 15 minutes ago [ 3 Answers ]

This morning my husband had plenty of hot water with good pressure and 15 minutes later I tried to shower and there was no water coming from hot tap, in any hot tap in the house. There is water in the water line coming from tank. We have clear pex and I can see the water coming out of the tank. ...

I have a Bios CE 1177 Weather Station... It worked fine for about 10 months... I recen [ 0 Answers ]

I have a Bios CE 1177 Weather Station... It worked fine for about 10 months... I recently lost all exterior information... I am just seeing the `---`in the wind speed, direction and temp... I have changed all of the batteries as well as connected it directly to the Transmitter... with no results....

My husky power washer will not run.. Just humms... Worked fine last season [ 5 Answers ]

Power washer not working

Worked for co. 20 years 10 years were on 1099 misc. Can I still collect unemployment? [ 4 Answers ]

Can I collect unemployment?

I have a Kenmore Elite washer which worked fine the last time I used it a few days ag [ 0 Answers ]

I have a Kenmore Elite washer which worked fine the last time I used it a few days ago... I just went to use it and when I went to select cycle and stuff, none of the buttons light up, like there is no power. The outlet works and plugging the washer elsewhere made no difference. Any suggestions...

View more questions Search