Ask Experts Questions for FREE Help !
Ask
    911america's Avatar
    911america Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 25, 2012, 11:44 AM
    Gas fireplace
    Some one took the grills: top and bottom for my SFC unit. Can I still get them?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 25, 2012, 11:50 AM
    Quote Originally Posted by 911america View Post
    some one took the grills: top and bottom for my SFC unit. Can I still get them??
    Call the manufacturer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas line to a gas fireplace insert [ 3 Answers ]

I am installing a vented gas insert into a masonry firebox. I have to drill into the firebrick and block wall to get to the main gas line which is on the other side of the wall. Is it safe to use flex line through the firebrick and block to get to the gas line?

SFC Gas Fireplace Gas control valve [ 3 Answers ]

I have gas powered SFC fire place model xDVR5-CMNS serial# 018813 and need to replace the gas control valve. I have tried to contact the company and they are out of business. Can someone tell me where I can get this part of if an alternative exists? Thx

Does gas emit in the house when pilot light of gas fireplace goes out? [ 2 Answers ]

I have a gas fireplace and on a windy day the pilot light actually went out. My dad said that even though the pilot light isn't on it's emitting gas into the house- which is a health hazard, but I thought that as long as the switch that turns on the light is off there is no risk. Can anyone tell me...

No gas supply, or faulty valve in gas fireplace? [ 4 Answers ]

We use a regency Gr55-3 ~20,000btu gas fireplace for heating our bedroom. Its about 10 years old and has given us no trouble before. The gas supply line is a small (3/8"?) flexible copper tube that runs about 40' from a prv. I believe the prv lets pressure down from 2psi to a few inches of...

Gas Piping Question about gas fireplace [ 5 Answers ]

Hello all, I'm not sure whether to ask this question in the heating forum or here, but it seems to be more a piping question. I am installing a gas fireplace. I got it used, and pieced it together from two sources, meaning I'm needing to change a few things. The burner I got was configured...

View more questions Search