Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Waltec plumbing fixtures
[ 1 Answers ]
I have two urinals with waltec manual flush valves that are side by side. One of them runs all the time very slowly and won't flush manually. The other flushes manually but with very low pressure. Any troublshooting advice would be helpful. Thanks
The toilet fushes fine, but when we use the other plumbing fixtures bubbles.
[ 1 Answers ]
The toilet flushes fine, but when we use the other plumbing fixtures bubbles again.
Refinish bathtub plumbing fixtures
[ 3 Answers ]
I have an 20 year old Stanadyne (I've been told this is now Moen) bathtub fixures that still work but they don't look good anymore. Is there a way to have them refinished or repainted so they can look good again? I have tried polish and lime and calcium removers and industrial cleaners that didn't...
Plumbing Fixtures
[ 3 Answers ]
What is the maximum amount of water closets allowen on a 3" horizontal drain?
Plumbing fixtures distance from main drain
[ 8 Answers ]
If all the fixtures-sinks,showers,washing machine etc. excluding the toilets are within 4 or 5 feet from the main 3"drain line which is attached to a 3" vertical stack,are they required to be separately vented?This scenario is existing in the plans for a slab foundation where all the plumbing is in... View more questions Search
|