Ask Experts Questions for FREE Help !
Ask
    ashrafmoghieb's Avatar
    ashrafmoghieb Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 5, 2012, 06:48 AM
    How can I decrease COD in industrial waste water from 10000 ppm to 1500 ppm as maximu
    Dear all

    I have one customer have food factory.

    His water waste have COD more than 10000 ppm .

    He asked to decrease this to max 1500 ppm .

    Please advice me
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
    		  
    #2

    Apr 5, 2012, 06:50 AM
    Filtration ?
    ashrafmoghieb's Avatar
    ashrafmoghieb Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Apr 5, 2012, 07:36 AM
    Quote Originally Posted by Curlyben View Post
    Filtration ?
    How can filtration will decrease COD more than 80 %?
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
    		  
    #4

    Apr 5, 2012, 07:38 AM
    As I'm not sure what COD actually is it was simply a suggestion.
    If you would care to clarify your question that would be great.
    ashrafmoghieb's Avatar
    ashrafmoghieb Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Apr 5, 2012, 07:43 AM
    Quote Originally Posted by Curlyben View Post
    As I'm not sure what COD actually is it was simply a suggestion.
    If you would care to clarify your question that would be great.
    COD =Chemical Oxygen Demand
    it type of water analysis parameter , to indicate the range of wastes in water from any organization , which going to drainage .

    I working in decrease high range of water parameters from high to limits in my country regulations

    Please don't hesitating to ask any questions

    Ashraf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is ppm of 3% [ 2 Answers ]

What is the formula of rejection in ppm

Calculate the ppm CaCO3 hardness of a water sample [ 1 Answers ]

The calcium hardness of a water sample is found by complexation of Ca2+ with excess EDTA and back-titrating the excess with MgCl2. A known amount of EDTA (0.0100 M, 25.00 mL) is added to a 20 mL aliquot of the water sample. (Y is used to symbolise the EDTA molecule) Ca2+(aq) + Y4-(aq) <->...

What do you mean by ppm as CaCo3 [ 6 Answers ]

What is ppm?how I do ppm calculate? [ 1 Answers ]

What is ppm?how I do ppm calculate?

How many ppm when add 10kg of chlorine 70%^ concentrated to 500 barrel of water [ 1 Answers ]

How many ppm when add 10kg of chlorine 70% concentrated to 500 barrel of water

View more questions Search