Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
One of my Heating Zones stopped working
[ 1 Answers ]
I have a Mastertrol Mini Zone-2 heating system. One of the Zones stopped working. I checked the non working damper by wiring to the working zone and it worked; so the damper is not the issue. What would cause the 2nd zone not to work properly
Kirkland Signature, by whirlpool; Dryer stopped heating and timer stopped working
[ 2 Answers ]
I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?
I have a singer electric fan heating unit which has stopped working.
[ 1 Answers ]
I have used two of these units to heat the basement for many years. You can't get anything like this qualitywise anymore. You push the on switch and then turn on the thermostat, you get a delay antil heatiing element warms up, then fan starts. All controls including thermostat are in the unit. ...
A/C,Heating and Fan stopped Working
[ 3 Answers ]
My home A/C stopped working the other day. I set my thermostat to cool and nothing set it to heat and raised the tempt. On the therm. And nothing as well. I set the fan switch to on and nothing also. All my breakers are on and I am getting 220v after my fuses and also at the contactor. I...
Air/Heating Unit (Electric) Suddenly stopped working
[ 5 Answers ]
Hello In July we replaced the motor and the relay switch on the unit outside the house. The unit had been running fine. Sept. 14 it was a little muggy in the house so I turned the thermostat down to 72 to kick the air on. Nothing happened all I heard was a "click" which would normally start the... View more questions Search
|