Ask Experts Questions for FREE Help !
Ask
    bcottage's Avatar
    bcottage Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 26, 2011, 02:09 PM
    Heat-n-Glow gas fireplace control
    My gas fireplace control has a manual and thermostatic control. The temperature can be set and the fire starts automatically, or use manual control and press once for high, press again for low. Neither manual nor automatic is functioning.
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Sep 26, 2011, 03:33 PM
    Hi bcottage and welcome, can you post a make and model number? I'll see if I can help.
    bcottage's Avatar
    bcottage Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 27, 2011, 06:16 AM
    Control is Heat-n=Glow WSK200-HNG, Originally there was a manual start, High, Low, Off, and a thermostatic control that would maintain a set temperature, The manual control stopped working, and we used the thermostatic control. Now, we get no results from either. Also, blower control had three settings, now inoperative. Any ideas?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #4

    Sep 27, 2011, 07:30 AM
    Quote Originally Posted by bcottage View Post
    Control is Heat-n=Glow WSK200-HNG, ?
    This no. in on a wall switch? Have you checked the power to the switch?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

SFC Gas Fireplace Gas control valve [ 3 Answers ]

I have gas powered SFC fire place model xDVR5-CMNS serial# 018813 and need to replace the gas control valve. I have tried to contact the company and they are out of business. Can someone tell me where I can get this part of if an alternative exists? Thx

Concord 80 gas turns off after glow [ 1 Answers ]

I have a concord 80 plus gas furnace. I turn on the temperature control to say 75 and the system starts. Sounds the fan or blower is on, then the glow spark then I can see the gas flames turn on but they only last about 4 or 5 seconds. Then the cycle starts again. Shouldn't the gas flames turn on...

Does gas emit in the house when pilot light of gas fireplace goes out? [ 2 Answers ]

I have a gas fireplace and on a windy day the pilot light actually went out. My dad said that even though the pilot light isn't on it's emitting gas into the house- which is a health hazard, but I thought that as long as the switch that turns on the light is off there is no risk. Can anyone tell me...

No gas supply, or faulty valve in gas fireplace? [ 4 Answers ]

We use a regency Gr55-3 ~20,000btu gas fireplace for heating our bedroom. Its about 10 years old and has given us no trouble before. The gas supply line is a small (3/8"?) flexible copper tube that runs about 40' from a prv. I believe the prv lets pressure down from 2psi to a few inches of...

View more questions Search