[mawalko]

Height of the angle stop on a toilet and the distance from the wall for the toilet ?

[ballengerb1]

Are you asking the distance for the tank or the base. This really depends on which toilet you buy, they come in 10", 12" most of the time. Height of the supply line coing out of the wall is 8" for me, no special code or rule

[massplumber2008]

Hi all...

For best fit, the toilet pipe should be 11.5" to the center of the pipe from the finished wall, but most are set at 12" from the finish wall. As ballenger stated, the toilet supply is not a code... depends on the toilet and/or the baseboard you intend to install. 8" as Ballenger suggested works for most cases... :)

Mark

[speedball1]

height of the angle stop on a toilet and the distance from the wall for the toilet ?

Unless it's a one piece toilet we position the toilet angle stop 6" to the left of the center of the drain and 6" up off the floor. Good luck, Tom