 |
|
|
 |
New Member
|
|
Apr 14, 2010, 10:54 AM
|
|
Criterion II troubleshooting
I have a Criterion II heater. Sometimes it works sometimes it don't. I hear the thermostat "click" on, but no spark, no blower, no nothing. The two green lights are always on except when the thermostat triggers "on", then the OK light flashes on and off 4 times. I do notice under the strip where the thermostat wires go, there are two horizontal white things that get somewhat hot?
|
|
 |
New Member
|
|
Apr 14, 2010, 11:08 AM
|
|
 Originally Posted by tommyt99
I have a Criterion II heater. Sometimes it works sometimes it dont. I hear the thermostat "click" on, but no spark, no blower, no nothing. The two green lights are always on except when the thermostat triggers "on", then the OK light flashes on and off 4 times. I do notice under the strip where the thermostat wires go, there are two horizontal white things that get somewhat hot?
I also just looked at the schematic, it says four lights followed by a 2 second pause, which mine is doing, said it is the pressure switch closed. Where I the pressure switch?
|
|
 |
New Member
|
|
Apr 14, 2010, 11:15 AM
|
|
 Originally Posted by tommyt99
I also just looked at the schematic, it says four lights followed by a 2 second pause, which mine is doing, said it is the pressure switch closed. Where i the pressure switch?
Well again, now it fired up noproblem. Don't understand. When it does work, it works fine. But I did learn a little bit more about this thing reading from this site, thanks.
|
|
 |
New Member
|
|
Apr 28, 2010, 06:42 AM
|
|
Found out what it was. To the left of the blower is a small round black plastic thing that has a vacuum tube running to the blower. It has a couple of wires running to it as well. When the thermostat kicks in, but nothing happens, I just tap this thing and it fires right up every time. Is this the pressure switch?
|
|
 |
Ultra Member
|
|
Apr 28, 2010, 11:15 AM
|
|
Yes this that is the pressure switch. Blow out the vacum tubes and try it again.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Rheem Criterion 2
[ 2 Answers ]
My friend has just moved into a house that was previously abandoned. His furnace is a Rheem Criterion 2 brand/model. We can't tell where the furnace filter should go or what size it is. Can anyone help me out?
Rheem criterion ii troubleshooting
[ 22 Answers ]
I have a Rheem Criterion II gas furnace, that quit working. I checked it out, and found that the ignighter would come on, the gas would start, and then it would shut off. Figured it was the flame sensor. Before I could sand or replace it, it quit even doing that.
I didn't get voltage off the...
The Rayleigh Criterion
[ 1 Answers ]
I really need help with figuring this question out.
Q. The Rayleigh Criterion states that:
A Two points can just be resolved in an image if their diffraction patterns overlap perfectly.
B Two points can just be resolved in an image if their diffraction patterns overlap such that the...
Criterion 2 Furnace
[ 1 Answers ]
I have a Criterion 2 Furnace with a Rheem SEER 12 A/C unit. Is the furnace considered a multi-stage unit? I bought a Lux tx9000ts digital programmable t.stat and it states that it will not work on a multi-stage unit.Previous home owner lost all manuals and I can't find any concrete info. Thanks.
504, what are the new criterion?
[ 1 Answers ]
I know to be qualified for 504 accommodations, you must have an academic deficiency. Is this the only thing needed to qualify?
Thanks
View more questions
Search
|