| 
 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Wire conversion for 2-stage heat/1-stage cool thermostat
 [ 1 Answers ]
 What is the conversion for wire connections from a Lennox to a White-Rodgers 1F72-151. The old connections were: G, W1, W2, Rc, Rh, Y1 and Y2. The new connections are: W2, E, O/B ,R ,L ,G, C and Y 
Single Stage & Mult-stage heat pumps
 [ 3 Answers ]
 What is the difference between a single stage and multi-stage heat pump? 
Hvac1000: Or ing stage relays (multi-stage stats to single stage)
 [ 1 Answers ]
 Would you agree that you can and should OR the outputs of say a 2 stage heating stat to make it a single stage? OR means connect the outputs together. Example: Connect W and W2 to create a single stage stat. I'm under the impression that either W1 or W2 is activated and not both and that this... 
White rogers thermostat 2 stage heat 1 stage cool
 [ 6 Answers ]
 Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused: 
White rogers thermostat 2 stage heat 1 stage cool
 [ 1 Answers ]
 What is the right wiring to hook the WHITE ROGERS 80 SERIES thermostat up ( 1F82-261)? I have a outdoor wood burner dlowing hear to a exchanger in the ducts , and I have propand gas as a back up sorce The furnace is a coleman evecon ( 94 model) with ac (up draft) I think I had the wiring... View more questions Search 
 |