Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing a cleanout in an iron pipe sewer line
[ 3 Answers ]
OK; read all the posts and exposed my 4" iron pipe sewer line as close to the house as I can get- about 3 ft. Ready to cut the pipe and install a combination wye and 1/8 bend but first two questions: 1. Is it really worth all the trouble to double the wye to provide access to the portion of the...
Belly in sewer pipe(Basement )
[ 4 Answers ]
My sewer pipes were not properly hung @ a productive enough slant to ensure bellies don't occur and proper flow to the outside of the home. So now they must be re-hung. Its about 20 ft of pipe to the outside spot. My question is ," what is the viable angle to hang them?" And," how often should a...
Basement leak around sewer pipe
[ 1 Answers ]
My house is about 4 years old, it has started to leak water into the basement surrounding the sewer pipe that leaves the basement. There is some kind of rubber boot around the sewer pipe that goes into the basement wall. There is no change of terrain outside the house and no sloping roof on that...
Sewer smell from toilet, loud thud from pipe down in basement when flushed.
[ 3 Answers ]
Hello, This is my first post, and I hope one of you folks can help me out with an answer. Over the last couple of weeks, our main bathroom toilet has developed a sewer gas odor issue, while at the same time a loud thud from the drain pipe in the basement has been getting louder and louder every...
Basement sewer pipe
[ 2 Answers ]
My house is about 95 yrs. Old in northeastern Pennsylvania, my sewer pipe is large and black, can you tell me what material it's made of? I can't tell if its cast iron, or cement, etc. Where there are connections, at the joints, it seems to be rusting. Can I patch or paint this? Thanks, m.h.... View more questions Search
|