Ask Experts Questions for FREE Help !
Ask
    slomo's Avatar
    slomo Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 13, 2010, 06:47 PM
    york variable speed ac fan motor will not shutoff only slow down
    York ac (f2fv060) variable speed air handler. Blower motor will not stop only slow down when tstat shuts ac off.Just replaced heater relay and problem started.
    builderbob1's Avatar
    builderbob1 Posts: 41, Reputation: 2
    Junior Member
    		  
    #2

    Jan 14, 2010, 01:28 AM

    Relay not wired correctly or wrong relay
    slomo's Avatar
    slomo Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 14, 2010, 05:35 AM
    Quote Originally Posted by builderbob1 View Post
    relay not wired correctly or wrong relay
    Builderbob1 even if this relay is not hooked up to circuit board,can this still happen?
    builderbob1's Avatar
    builderbob1 Posts: 41, Reputation: 2
    Junior Member
    		  
    #4

    Jan 14, 2010, 09:21 AM

    This relay has to be hooked up for any voltage to supply the outside unit .
    builderbob1's Avatar
    builderbob1 Posts: 41, Reputation: 2
    Junior Member
    		  
    #5

    Jan 14, 2010, 09:23 AM
    Sorry I called it a relay and it is actual called the contactor. It is where the 220 and 24 volts are connected to the unit from the house or supply line.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Slow down 12v electric motor speed [ 7 Answers ]

I have a 12v electric motor (windshield wiper motor) that I am trying to slow the rpms on. This is not still in a vehicle. I've mounted it to a coffin and am using it to pull the lid closed as it makes a revolution therefore making a coffin that opens & closes itself. Thought of trying a pot but...

Goodman 95% ge variable speed motor starting problems [ 1 Answers ]

My goodman 95% furnace has themals on the blower fan they get hot and trip out.It has done this four times in the last year.I reset them and it works for a while four weeks may be and does it again. I replace the control board. Same problem now I want to replace the blower DC variable speed...

Variable speed on York Air Handler [ 1 Answers ]

I have a york air handler (no heat pump) and I have the motor on low (just have to move a wire to change from L,M,H) I was wondering if changing the motor speed to Med or High might help move the air better and make up for better efficiency and help not to be so cold in here at night. I just...

Retrofit variable speed fan motor into air handler [ 1 Answers ]

I have separate independent heating and cooling systems: oil-fired HW baseboard heat and central air. I presently close off the AC vents in the winter to avoid downdraft from the attic-based ducting system (whole AC distribution is in attic). I've heard that it would improve efficiency and...

Trane air handle variable speed motor xl1200 [ 3 Answers ]

The fan hasitates to star It tries to move and the after a minute it will run. I try to set the dip swithches for no delay after running but no imprument, The problem with this is that the coil inside gets frozen since no air is circulating, I caom with a temporary solution a delay circuit on...

View more questions Search