Ask Experts Questions for FREE Help !
Ask
    alanhope's Avatar
    alanhope Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 24, 2009, 03:51 AM
    a/c safety switch
    My home a;c keeps cutting out due to water filling up in the safety switch pipe, I have cleaned the lines and they are OK any ideas please thanks
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Sep 24, 2009, 05:19 AM

    2 systems I know of, Drain down and out, or it has to be pumped up and over.
    So either drain is clogged or pump is not working.
    alanhope's Avatar
    alanhope Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 26, 2009, 02:07 AM
    Quote Originally Posted by Stratmando View Post
    2 systems I know of, Drain down and out, or it has to be pumped up and over.
    So either drain is clogged or pump is not working.
    Thanks put air though the pipes,worked for a day then cut out again
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Sep 26, 2009, 07:17 AM

    Bleach down the pipe can eat the build up.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Inline safety switch [ 5 Answers ]

We have to purchase a inline safety switch(for our ac unit) which isn't covered under our warranty,is this part associated to our heating unit?

Safety switch keeps tripping [ 4 Answers ]

I have a Carrier unit with a Becket Model "AFG" oil burner. Unit was installed 5/2002. It was given its maintenance service on 11/15/07 by Carroll Ind. I was delivered 100 gal of oil the week before Christmas around the 18th. System has been working fine until 2 weeks ago when the Honeywell...

Rheem safety switch too sensitive [ 1 Answers ]

I have a Rheem furnace. The furnace won't ignite sometimes, when I press on the lower door panel and wiggle, the safety switch will depress again and the furnace will fire up. Does the safety switch need to be replaced? It seems to be working a little TOO well. I am tired of waking up with it 62...

How do I install in safety overflow switch for ac [ 2 Answers ]

Need help with getting a over flow switch that needs installing on a ac unit. Used to turn off ac if overflow backs up so there is no water damage. Ac is above furnace unit in a hall closset area. Email fd150 at hotmail dot com

View more questions Search