 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Originally Posted by Mistergee
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I purchased this home 3-4 years ago... it already had a automated watering system for the lawn. The system has 7 zones for watering, the third one of which is no longer working. I am assuming that I have a bad solenoid valve somewhere (does this seem likely?)... but I have no idea where it...
Based upon what I can decipher after moving into a new (used) home, I have a well system that is currently using a 40/60 setting for the pressure tank. Actual pressure readings when the water is turned off are generally around 64 psi and when the sprinkler system is running, it is generally around...
I have an irrigation system with an underground well, a tank, a pump start relay switch, a timer and a pressure switch set to turn on at 20 psi and off at 50 psi. There are 3 zone valves connected to the timer. There is a separate zone for hose bibs that is not connected to a valve or the timer,...
Is a drip irrigation system cost effective? It takes four hour's to water the plants properly with a hose.
Five in-ground controllers (zones) handle my sprinkler system sprinklers. These controllers are in 5 different areas on my property. I noticed today that when zone one comes on that zone two comes on at the same time which never was the case in the past. As a consequence, the pressure is...
View more questions Search
|
