Ask Experts Questions for FREE Help !
Ask
    rama_bhatk's Avatar
    rama_bhatk Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 28, 2009, 06:22 AM
    Circuit Breakers
    Is it safe to use a 300mA Circuit Breaker in the elevator. Is it safe for human.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Aug 28, 2009, 08:01 AM

    Please explain.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Aug 28, 2009, 09:35 AM

    What do the electrical specifications call for?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Aug 28, 2009, 12:45 PM
    What country is the elevator located?

    Are u referring to and RCD, Residual Current Device?

    Equipment ground fault protection is higher than personnel ground fault protection, and will not protect humans.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #5

    Aug 28, 2009, 12:51 PM
    Quote Originally Posted by rama_bhatk View Post
    Is it safe to use a 300mA Circuit Breaker in the elevator. Is it safe for human.
    I don't care what country you are in. If you have to come to a DIY message boards to ask about elevator wiring you are NOT qualified to do this work.
    PLEASE find someone who is. Peoples lives are at stake.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Circuit Breakers and Electrical [ 17 Answers ]

Hi... I am having a problem with my circuit breakers... when a couple of them tripped and I went down to reset them... the electrical appliances and switches etc. associated with these particular switches did not come back on... went downstairs to the breaker box and reset the switches again......

Circuit breakers [ 6 Answers ]

If I have a main disconnect at the pole what kind of breaker box should I put in my quanset To replace the old fuse box,a main lug or main breaker. This is also part my shop. Thanks for any answers, can omeone please help??

Circuit breakers [ 16 Answers ]

I purchased and ready to install a new diahwasher. The instructions call for a 15 amp circuit breaker. The current breaker is a 10 amp breaker solely for the dishwasher. Can I use the 10 amp or should I change the breaker to 15 amp? How difficult would it be to change?

Circuit breakers [ 2 Answers ]

It seems so far that our kitchen is wired all on the same circuit. When we use the oven and microwave or the microwave and the toaster oven which is on the other side of the room the breaker trips. That breaker is currently 15amps. Would it be all right to change that breaker to a 25 or 30 amp for...

Circuit breakers [ 2 Answers ]

I would like to up grade the amps going to my garage so I can run my saws and power tools with out dimming my shop lights. I currently have a old style fuse box in the garge feed with 12ga uf cable run off a 20amp circuit breaker in the service panel. My plans are to replace the fuse box with a new...

View more questions Search