 |
|
|
 |
New Member
|
|
Jul 6, 2009, 03:31 PM
|
|
Can "CuraFlow" epoxy pipe lining be in galvanized gas pipe?
Can "CuraFlo" epoxy pipe lining be used for protecting galvanized pipe for gas use?
|
|
 |
Home Repair & Remodeling Expert
|
|
Jul 6, 2009, 03:37 PM
|
|
Curaflow is not rated for gas. Some codes will allow galvanized pipe outside but we normally use black pipe. Galvanized pipe can flake with gas and clog an orifice.
|
|
 |
New Member
|
|
Jul 6, 2009, 04:07 PM
|
|
I want to try "Curaflo" in galvanized gas pipe from gas meter to pool heater in backyard. Any comments?
|
|
 |
Plumbing Expert
|
|
Jul 6, 2009, 04:11 PM
|
|
Ive actually never heard of curaflo. I just looked it up on the web. And no, do not use it on gas piping. As far as I'm concerned, I don't even think I would suggest if for water piping, but I've never seen or used it, so that's stictly a guess. But I can promise you that this product would not be allowed in any gas piping system. Can you tell us why you want to use it? Do you have leaks now, or do you just want to prevent a leak? I think your best bet would be installing new black iron gas supply to pool boiler.
|
|
 |
New Member
|
|
Jul 6, 2009, 04:55 PM
|
|
 Originally Posted by mygirlsdad77
Ive actually never heard of curaflo. I just looked it up on the web. And no, do not use it on gas piping. As far as im concerned, i dont even think i would suggest if for water piping, but ive never seen or used it, so thats stictly a guess. But i can promise you that this product would not be allowed in any gas piping system. Can you tell us why you want to use it? do you have leaks now, or do you just want to prevent a leak? I think your best bet would be installing new black iron gas supply to pool boiler.
Thanks for your response. I googled CuraFlo and opened the company's website for product info. Very informative. In explaining the uses, they only refer to water pipe applications. Background: We smelled gas in the lawn areas in our backyard and called the gas company (So Cal.). A service tecjh came out and detected gas pipe leakage feeding our swimming pool heater under the lawn and pateo paving. It would be a major and costly undertaking to replace the pipe (galvanized pipe, probably 20 years old, under the lawn and patio paving). He suggested checking out the "CuraFlow" type products (there are several brands). If it would work it would save me a "bundle". I tried calling a Curaflo tech, but the office was closed EST. So I tried AMAQ.
|
|
 |
Home Repair & Remodeling Expert
|
|
Jul 6, 2009, 05:11 PM
|
|
Knowing a bit about CA building codes I can't picture that this application would be allowed. It makes me surprised that a tech from the gas company mentioned it. Let us know what Curaflow has to say when you reach them.
|
|
 |
New Member
|
|
Jul 7, 2009, 01:23 PM
|
|
I just spoke with a product tech at CuraFlo corporation. "The product is suitable for gas line usage at this time"
|
|
 |
Plumbing Expert
|
|
Jul 7, 2009, 03:22 PM
|
|
That is very surprising considering gas is much more deadly than water. I would still check with local authorities to see if it is allowed on gas in your area. If you do decide to go with it, I would also recommend having someone with liability insurance install it for you, and make sure it gets pressure tested just as regular gas pipe would. You can not be to safe here. Good luck and please let us know how things work out.
Might not hurt to call back curaflow and talk to a superviser about the use on gas pipe, sometimes them people will say anything to sell a product, not caring if it is a danger to you and your neighbors life.
|
|
 |
New Member
|
|
Jul 7, 2009, 03:43 PM
|
|
Sorry about that, I met to write, "ClaraFlo is NOT suitable for gas line usage at this time".
|
|
 |
Eternal Plumber
|
|
Jul 7, 2009, 03:59 PM
|
|
Thanks for clearing that up Bill. I would replace that galvanized line with black iron. Good luck, Tom
|
|
 |
New Member
|
|
Jul 7, 2009, 04:11 PM
|
|
Maybe it's me that needs the ClaraFlo... I'm sure my pipes are getting a little rusty!
|
|
 |
Eternal Plumber
|
|
Jul 7, 2009, 04:23 PM
|
|
 Originally Posted by Panda Bill
Maybe it's me that needs the ClaraFlo...I'm sure my pipes are getting a little rusty!
Tell you what! We'll get you repiped at the same tine we run a new gas line to the pool. Have a good one. Tom
|
|
 |
New Member
|
|
Jul 7, 2009, 04:36 PM
|
|
Thanks Tom, Your follow up and risk concern commentary was very helpful & substantiated.
Bill
Always glad to help!! Tom
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Galvanized pipe to either Copper/CPVC pipe
[ 14 Answers ]
I had a leak in my cold water feed which happens to be galvanized pipe. It was between 2 floors and I cut out the affected section. I am going to replace the cut out section with either copper or CPVC. But how does one connect unthreaded galvanized pipe to the after mentioned pipes? I don't know if...
Attaching new 2" drain pipe to existing 3" soil stack - PVC
[ 4 Answers ]
All,
I am installing an additional sink on the main level of my home. On the lower level, below, there is a main 3" soil stack.
I am thinking to use a 3"x2" Y connector to tie 2" drain pipe into this main soil stack.
The sink will be vented using AAV (island)
Questions:
1. Is there any...
Teflon or Pipe Dope for 1 1/4" Water Pipe
[ 7 Answers ]
I am building a project that uses several joints of 1 1/4 " galvanized pipe, including elbows and Tee's. The unit will be plumbed into my 50 psi water system. What is the best way to seal the pipe joints? I have assembled the unit and tested using teflon pipe dope and had several leaks.
Tub to Shower 1.5" pipe to 2"pipe
[ 6 Answers ]
Shower uses a 2" pipe. Tub used a 1.5 inch pipe. Bought a 2"pipe coupler... using the coupler to attach the new 2" pipe to the old 1.5 inch joint on the 3" main house drain pipe.
The coupler has too much play on the 1.5 inch side... almost like it's an 1/8th of a inch smaller than 1.5. What's...
View more questions
Search
|