Ask Experts Questions for FREE Help !
Ask
    wardeleo's Avatar
    wardeleo Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 11, 2009, 06:11 AM
    Washing machine stops between cycles
    My Whirlpool washing machine just stops between cycles. It does do it all the time. Maybe 10% of the time. Usually to get it going you just need to give the machine a bump. Although some times you need to turn it off and on again. Does anyone have any ideas on the problem and a fix for it?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 11, 2009, 08:16 AM

    Sounds like you have a dead spot on your timer. No repair if that's what it is, you replace the timer.
    wardeleo's Avatar
    wardeleo Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 11, 2009, 10:40 AM
    Quote Originally Posted by wardeleo View Post
    My Whirlpool washing machine just stops between cycles. It does not do it all the time. Maybe 10% of the time. Usually to get it going you just need to give the machine a bump. although some times you need to turn it off and on again. Does anyone have any ideas on the problem and a fix for it?
    I meant to say it does not do it all the time
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Jun 11, 2009, 11:11 AM

    Still the same answer from me.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Series 90 Washing Machine Stops Before Rinse [ 2 Answers ]

My 1997 Kenmore Series 90 washing machine stops after the agitation and before the rinse cycle. For a while, I have been noticing a delay after the click in the agitatation before the rinse begins. Today there is NOTHING happening? Any ideas?

New Washing machine fails to engage cycles that require water [ 2 Answers ]

I have a new maytag WTW57ESVW washer that ran one load and got unbalanced in the spin cycle. Following that load it has failed to engage any cycle that requires water.. Any thoughts?

How do you fix a washing machine drain that overflows during rinse cycles [ 2 Answers ]

How do you fix a washing machine drain that overflows

Admiral washing Machine Model AAV7000 spind but takes 2-3 spin cycles to drain [ 1 Answers ]

Whether rinse or final spin, the tub begins to spin albeit slowly. I have a clear hose so I can see the water moving but slowly. It will not completely drain 1st time through. If I take out the clothes then the water drains fast on the spin. Then I put the clothes in it and it will spin down. ...

Washing Machine (whirlpool) will not advance cycles [ 1 Answers ]

My whirlpool washing machine model LA9500T suddenly today stopped advancing from cycle to cycle. It fills water correctly and goes into agitator cycle. It then keeps agitating until I manually advance to next cycle, on and on. What can I do to fix this and is it repairable by me (I can do small...

View more questions Search