Ask Experts Questions for FREE Help !
Ask
    wizzard77's Avatar
    wizzard77 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2009, 04:11 AM
    Pressure Tank installation

    Hello, I am having a deep well drilled. Can someone give me a detailed drawing, or send me in the right direction to see one. I need the piping and wiring from well head to the pressure tank which is located in my basement . Any help will be greatly appreciated...
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 6, 2009, 04:30 AM
    Quote Originally Posted by wizzard77 View Post
    Hello, I am having a deep well drilled. Can someone give me a detailed drawing, or send me in the right direction to see one. I need the piping and wiring from well head to the pressure tank which is located in my basement . Any help will be greatly appreciated...
    How's this?(see image) good luck, Tom
    Attached Images
     
    wizzard77's Avatar
    wizzard77 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jun 6, 2009, 04:44 AM

    Is there any difference since I am using a submersible pump.. and what fitting and controls will I need at the tank...
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Jun 6, 2009, 04:52 AM
    Quote Originally Posted by wizzard77 View Post
    Is there any difference since i am using a submersible pump...? and what fitting and controls will i need at the tank...
    Try this one.
    Attached Images
      
    wizzard77's Avatar
    wizzard77 Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Jun 6, 2009, 05:32 AM


    You sure are fast... thaks so much... just what I needed... GREAT SITE
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pressure/bladder tank losing pressure? [ 11 Answers ]

Well, I have asked some questions about my plumbing before. So I am calling on you guys once again. I have a 52 gallon pressure tank/bladder tank made by wellsaver. I turn the water on and have good pressure for a few minutes then it basically goes dead with no pressure. I recently posted questions...

Bigger pressure tank or increase pressure? [ 5 Answers ]

I bought a new home and the builder had installed a 20 gal pressure tank. I have a jet pump system where the motor sits directly on the tank itself. I really notice the pump running a bit,but also notice the loss of pressure quickly, especially in the shower. Now I was thinking of buying a much...

Loss of water pressure w/new pressure tank [ 8 Answers ]

Hello everyone, I have a question involving my plumbing. I was having terrible water pressure and I checked the pressure at the pump itself and it was great. Went to the pressure tank and it was trickling. Shut down power to pump and drained system - checked air pressure and it was not...

Pressure tank won't hold pressure only 20psi [ 7 Answers ]

Hi, I am lost at what to do. Early this week when running water, especially the shower after a few minutes the water pressure would go way down. After letting it off and let it sit the pressure would come back but only for a short time. Got worse as the week went on until we never got...

Deep well, pressure tank/switch not building pressure [ 13 Answers ]

The only way I have water pressure is to leave the power on! I have replaced the 5 gallon pressure tank (28psi when void of water)/fittings/pressure gauge and tried 3 new 30/50 pressure switches and the problem remains the same. With the power off, the pressure drops to 0 (not 30). When I...

View more questions Search