 |
|
|
 |
New Member
|
|
Apr 4, 2009, 09:02 PM
|
|
Electricity wire gauge size
A household clothes dryer needs 30A and electric range needs 40A what are the wires gauges required..
|
|
 |
Printers & Electronics Expert
|
|
Apr 4, 2009, 09:15 PM
|
|
Dryer = #10/3
Range = #8/3
If you pull individual conductors instead of cables then you must make sure that you include a ground wire.
|
|
 |
Electrical & Lighting Expert
|
|
Apr 5, 2009, 06:09 AM
|
|
More homework? :rolleyes:
|
|
 |
New Member
|
|
Apr 5, 2009, 11:32 AM
|
|
 Originally Posted by donf
Dryer = #10/3
Range = #8/3
If you pull individual conductors instead of cables then you must make sure that you include a ground wire.
Thank you, but you have to figure out the drop of voltage, the resistance, power etc.
How you give me an answer easy?
|
|
 |
Uber Member
|
|
Apr 5, 2009, 12:00 PM
|
|
LOL...
Don , you must have broken your crystal ball to not know you missed a bunch of answers. Just like teenagers, give them the right answers and your still wrong.
Must be liberal, you give and give and they want more, easy.
|
|
 |
New Member
|
|
Apr 5, 2009, 02:38 PM
|
|
Thank you, but I get it the correct answer
|
|
 |
Printers & Electronics Expert
|
|
Apr 8, 2009, 02:09 PM
|
|
Freeboy,
Did I miss something in your question? You only asked for the wire gauge.
I can supply more information if you provide more information.
For example, how can I calculate whether there is a voltage drop condition if you don't supply me with the distances from the main panel to the devices? I'm not clairvoyant.
|
|
 |
Uber Member
|
|
Apr 8, 2009, 02:27 PM
|
|
This is funny.
Maybe the wording of the answer is wrong. Maybe it should be "typically one would use... in a typical houshold installation, but a LOT of info is missing.
Voltage - assume 240
Wire 3 or 4 wire (Do 4 wire at 240 V)
Wire type - assumption copper
Wire length - remember to double it when doing calcs.
Wire type - assume Romex
Wire method - assume no conduit
Amperage - probably wrong anyway. The dryer probably suggests a 40 A circuit, but the dryer could pul. 36.999999 Amps
All of the details are missing. Seasoned professional make some assumptions.
And BTW, the service panel is not in the garage where the cable must be installed underground and 300' away.
Details.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Connecting 12 gauge and 14 gauge wire
[ 4 Answers ]
Is it ever acceptable to attach 14 gauge to 12 gauge wire? I have a remodel situation where I have a 20 amp/12 gauge wired circuit powering outlets only. I want to tap off the end-of-run outlet to power an electric-venting skylight. The skylight comes with 14/2 wire. Can I tap off the 20 amp...
Connecting 14 gauge wire and 12 gauge wires in the same blue box.
[ 2 Answers ]
I am wiring my basement. All the outlets are running off 2 independent 20 amp circuit breakers connected to each other by 12/2 wire.
I wanted to run some stubs off my 12/2 outlets. All each stub would do is run to a small light (max 180 watts) and of course a light switch. Since I ran out...
Cable Gauge - how does it affect electricity flowing through it?
[ 4 Answers ]
If you replace a power cable and thus increase the gauge of a power cable, will more energy automatically flow through the cable to the appliance purely based on the fact the gauge of the power cable has increased and no other factors have changed?
View more questions
Search
|